Questions tagged [hp-proliant]

Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

ProLiant describes a range of servers originally marketed by Compaq and later, by Hewlett Packard following the merger of the two entities.

  • BL is the prefix for the Blade servers.
  • DL is the prefix for 'dense' rackable servers, and includes the entry-level DL1xx-series, the midrange DL3xx-series, and the high-end DL5xx, DL7xx and DL9xx models.
  • ML designates the expandable tower/rack-capable product line.
  • SL denotes the scale-out product line intended for cloud and high-performance computing.

The second number gives a rough indication of the physical size within a range, and the third number indicates Intel (0) or AMD (5) CPUs: ProLiant DL360 is 1U high Intel-based, DL385 is 2U high AMD CPU(s).

All ProLiant servers also have a generation number, e.g. the DL580 G7 is a later version of and obsoletes the earlier DL580 G5. Note that due to marketing reasons, generation numbers on some models were skipped (for example there was no BL460 G4).

cf. IBM's System X, Dell's PowerEDGE

1203 questions
8
votes
1 answer

Does a raid controller use cache in JBOD mode?

I'm specifically asking about a P420 in a D380p G8 server. I'm planning on using storage spaces direct requiring a simple HBA. So I've disabled RAID on the P420's. I'm curious if in this JBOD mode the cache on the raid card is even used?
techpad
  • 91
  • 1
  • 4
8
votes
3 answers

How to enable and use the serial terminal of a HP Microserver Gen9?

I have a HP ProLiant Microserver Gen9. It has HP ILO version 4, but the Java based Remote Console doesn't work reliably and I can't use it after the POST screen in the free version of ILO (asks me to buy an ILO Advanced license). So I want to use…
nh2
  • 818
  • 3
  • 11
  • 21
8
votes
2 answers

Smart Array P410i with SATA SSD drives unstable

I have a HP Proliant DL380 G7 with said array controller and 6 INTEL SSDSC2KW4's, set up in Raid 5. Normally I have never had problems with SATA drives in servers, but this one has me baffled. I have installed ESXi 6 on it, and this usually goes…
Bjørn
  • 276
  • 2
  • 6
  • 10
8
votes
2 answers

Storage issues: Prolonging the life of a legacy Compaq ML370

I have an original ML370, from before there even were generations (2000). The storage system is comprised of a Smart Array 431 controller, 2 9.1 Gb Ultra3 SCSI (COMPAQ BD009635C3), and 4 146.8 Gb Ultra3 SCSI (COMPAQ BD14687B52). The two 9 gigs form…
tlum
  • 257
  • 1
  • 9
8
votes
1 answer

Identifying what caused a server reboot

I have an HP ProLiant DL380p Gen8 that is running VMWare ESXi 5.5. It has been rebooting itself at seemingly random intervals for the past 24 hours. There is only a single VM running, and even if I shut it down the host will still reboot. The server…
nachito
  • 245
  • 1
  • 4
  • 11
8
votes
2 answers

Can different drive speeds and sizes be used in a hardware RAID configuration w/o affecting performance?

Specifically, I have a RAID 1 array configuration with two 500gb 7200rpm SATA drives mirrored as logical drive 1 (a) and two of the same mirrored as logical drive 2 (b). I'd like to add two 1tb 5400rpm drives in the same mirrored fashion as logical…
rookie
  • 105
  • 1
  • 1
  • 5
8
votes
4 answers

Are new HP Gen8 servers compatible with g7 drives?

Are HP Gen8 servers (namely DL380 Gen8 with 2.5" HP disks) compatible with 2.5" harddrives from G5-G7 servers? I mean original HP disks in HP caddies not plain SAS/SATA drives.
Fedor Piecka
  • 410
  • 1
  • 3
  • 8
8
votes
4 answers

Rack Mounting a Server with hot air vents on the top?

We just got a couple of HP DL360 G7's, and I notice it has vents on the top. More hot air seems to exit through these vents than it does anywhere on the back. All our servers in the past have always vented all the hot air through the back. How…
Adam
  • 165
  • 2
  • 3
  • 9
8
votes
4 answers

Installing Windows on HP Proliant Servers without SmartStart

I have a PXE server for deploying Windows XP and Windows 7 to workstations. The process is as follows: Boot the workstation from the NIC. Workstation sends a DHCP request. DHCP server responds with an IP address and the location of the PXE…
Fitzroy
  • 321
  • 2
  • 4
  • 8
8
votes
2 answers

HP ProLiant ML350 G6: Does the RAID rebuild automatically?

A SAS HDD in our ML350 is faulty. We're buying a new one and I wanted to ask if I can just take out the faulty one and insert the new one with the server on to let it rebuild the raid or any manual operation is required.
Pitto
  • 2,009
  • 10
  • 33
  • 49
8
votes
3 answers

Can I convert a 1 disk RAID 0 to RAID 1?

This is dangerously close to question 18957, but it isn't quite the same. One of my logical drives on my P410i is a single disk RAID 0 (because I was short sighted at the time). It's now warning about imminent failure, and I'm looking for an easy…
mwalling
  • 532
  • 2
  • 5
  • 12
8
votes
7 answers

HP ProLiant Shared ILO port disadvantages?

The last few generations of HP ProLiant systems have featured an option to share the ILO functionality with the first network interface. I'm in a situation where per-port costs on the switch I'm using the a co-lo facility are fairly high. I can save…
ewwhite
  • 197,159
  • 92
  • 443
  • 809
8
votes
1 answer

HP DL160 G6 memory PC3-10600R vs PC3-10600E

I am using a HP DL 160 G6 server that according to specs takes PC3 Registered or Unbuffered. When I combine the two types of memory below the system will not POST. When I use just the first type of memory listed the system will POST. I have two…
Jeremy Hajek
  • 473
  • 1
  • 4
  • 15
7
votes
5 answers

What is the NAND used for in the HPE ProLiant DL360p Gen8?

I have a server with the error: 'iLO Self-Test reports a problem with: Embedded Flash/SD-CARD' ' Embedded media manager failed initialization ' HPE advises the following: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04996097 I've…
True
  • 71
  • 1
  • 1
  • 4
7
votes
1 answer

HP dl360p G8 writes/latency with SSDs in raid very poor

I have a DL360P g8 server with a HPE p420i raid controller (2gb cache). We have noticed that writes to the SSDs via raid are incredibly slow. The drives in question I have in the arrays are: Volume 1 - RAID6 * 6 x Intel 545s 120GB SSD SATA Volume…
user495566
  • 71
  • 2