Questions tagged [hp-proliant]

Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

ProLiant describes a range of servers originally marketed by Compaq and later, by Hewlett Packard following the merger of the two entities.

  • BL is the prefix for the Blade servers.
  • DL is the prefix for 'dense' rackable servers, and includes the entry-level DL1xx-series, the midrange DL3xx-series, and the high-end DL5xx, DL7xx and DL9xx models.
  • ML designates the expandable tower/rack-capable product line.
  • SL denotes the scale-out product line intended for cloud and high-performance computing.

The second number gives a rough indication of the physical size within a range, and the third number indicates Intel (0) or AMD (5) CPUs: ProLiant DL360 is 1U high Intel-based, DL385 is 2U high AMD CPU(s).

All ProLiant servers also have a generation number, e.g. the DL580 G7 is a later version of and obsoletes the earlier DL580 G5. Note that due to marketing reasons, generation numbers on some models were skipped (for example there was no BL460 G4).

cf. IBM's System X, Dell's PowerEDGE

1203 questions
-3
votes
1 answer

HP ProLiant DL180 Gen9 modding/cabling

I bought a HP ProLiant DL180 Gen9 server in 12LFF drives configuration. Now I'd like to put two additional 2.5" SATA drives inside the case to serve as system drives. As there isn't a default spot for that inside the case, I thought on using this.…
geewid
  • 15
  • 5
-3
votes
1 answer

hp proliant ml350 g4 broken scsi port?

I jsut got an hp proliant ml350 g4 from my nephew. He didnt know what to do with it and he didnt got it working. Now im trying to get it to work. what ive done: 1 I've created a logical drive. raid 5. 2 I downloaded centOS. It's centOS 7 DVD ISO 3 I…
T. Wich
  • 1
  • 1
-3
votes
1 answer

HP Proliant Gen 8 Server does not recognise any HDDs after removed from array

I'm going rapidly mad here! I had a 1TB drive show up as not working in its Raid 0 array and it seems to have affected my 6TB Raid 1 Array which was working. I took these drives out and put in 2 new 3TB drives to set up as a Raid 1 array. These…
Mel_P
  • 9
  • 1
-3
votes
1 answer

hp dl140 g3 how to repair after failed bios update

During updating bios to the new version (1.18) i got an error that computer can't read rom file. Then after reboot server did not start. Actually it starts but does not show anything, screen is blank, no system beeps or led signals. The question is,…
sint
  • 1
-3
votes
2 answers

Drive fault was asserted DELL

i have a DELL PowerEdge 2950 Server whit raid for 3 HDD. A friend whit a HP Proliant server which has broken, come to my help, to save information from the hard drive only had. When i put on my server his not reconized, and the error it's: HDD4…
Armando
  • 11
  • 2
-3
votes
1 answer

Server for virtualization

HP Proliant DL380 G5 I have looked at this server for some good virtualization. I can get the server for around 450usd 2x xenon (X5355) 2 x 72GB HDD 8GB Ram As my g3 360 and g4 360 and g3 360 are starting to get a bit slow. I will be running exsi…
-3
votes
2 answers

Need NIC driver for Proliant DL380 G4 NIC=NC7782

I have installed Windows 2003 Server Enterprise Edition (32bit) on a Proliant server but can not seem to find the driver for the NIC. I have spent hours looking with no luck. Would like to just point device manager to a .sys file or similar and be…
Dan D.
  • 1
  • 1
  • 1
-3
votes
1 answer

HP P420 Bandwidth Limitation

I have an HP DL360p G8 with P420g with 1G Cache and 4x Seagate Constellation 3TB as Raid 5 and 10Gbps UPLINK to my datacenter, As I know p420 is 6Gbps so its for the whole of the interfaces? or its 6Gbps Per Interface/hard disks?
Blackmetal
  • 105
  • 4
-4
votes
2 answers

Does this hard disk match with the HP ProLiant ML350 G5?

I've got an offering for the 300 GB SAS 10K 2,5" hard disk. Will this fit in my HP ProLiant ML350 G5 server. The description in the manual isn't that clear. I'm just don't want to buy something that doesn't fit. Thanks in advance! I didn't have…
Tim N.
  • 11
  • 4
-4
votes
1 answer

Proliant DL160SE G6 motherboard - does it need a 6 pin fan to be connected in order to POST?

I wanted to setup a 2 CPU server, but was not able to even POST with 1 CPU (x5550) and 4gb of ram (unbuffered). I have only the following hardware connected: 1) VGA monitor (checked cables, it works elsewhere) 2) USB keyboard 3) SSD disk (also…
-4
votes
1 answer

HP ProLiant DL360 Gen9 - server to server connetion

Just want to know if I can do a server to server connection via Cat6 cable for: HP ProLiant DL360 Gen9 thanks
Deep
  • 1
-4
votes
2 answers

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
user
  • 93
  • 1
  • 2
-5
votes
2 answers

Adding additional memory in HP server

I am planning the installation of additional memory in a HP DL360 server. Currently, this server has two processors and 8 x 8GB stick of RAM. I have not got access to the server yet so I will assume this is balanced across the two processors. We…
Mark
  • 1
-5
votes
2 answers

Unknown Linux Server Reset

We have a infamous box out of 4 running on the kernel version below. Linux **** 2.6.32-431.5.1.el6.x86_64 #1 SMP Tue Feb 11 11:09:04 PST 2014 x86_64 x86_64 x86_64 GNU/Linux The box now is suffering from restart without obvious logs unless from the…
wenxzhen
  • 3
  • 2
-5
votes
1 answer

HP's $1,000 RAID Controller is outclassed by on-board raid?

HP's $1,000 Smart Array P822 controller is outclassed by an on-board raid controller. I'm having a hell of a time trying to figure this one out. My problem is that performance on the HP controller is significantly below what the drive is capable…
DrWhy
  • 11
  • 1
1 2 3
80
81