Questions tagged [hp-proliant]

Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

ProLiant describes a range of servers originally marketed by Compaq and later, by Hewlett Packard following the merger of the two entities.

  • BL is the prefix for the Blade servers.
  • DL is the prefix for 'dense' rackable servers, and includes the entry-level DL1xx-series, the midrange DL3xx-series, and the high-end DL5xx, DL7xx and DL9xx models.
  • ML designates the expandable tower/rack-capable product line.
  • SL denotes the scale-out product line intended for cloud and high-performance computing.

The second number gives a rough indication of the physical size within a range, and the third number indicates Intel (0) or AMD (5) CPUs: ProLiant DL360 is 1U high Intel-based, DL385 is 2U high AMD CPU(s).

All ProLiant servers also have a generation number, e.g. the DL580 G7 is a later version of and obsoletes the earlier DL580 G5. Note that due to marketing reasons, generation numbers on some models were skipped (for example there was no BL460 G4).

cf. IBM's System X, Dell's PowerEDGE

1203 questions
7
votes
3 answers

Monitoring an HP ProLiant DL380 G7 without the bloat

I bought a refurbished HP Proliant DL380 G7 off of eBay. I run CentOS, and I'd like to know when a drive fails. A friend tells me that the lights on the front probably won't light up since I don't have HP software installed on the server - I have to…
7
votes
2 answers

Why doesn't the Internal USB port boot ESXi 6 on my Microserver Gen8?

I'm trying to run ESXi 6 off the Internal USB 2.0 port on a HP Microserver Gen8. No matter what I try it will not make any attempt to boot the internal USB to load the hypervisor. I installed ESXi 6 with the customised ProLiant HP image (Jan 2016).…
James White
  • 674
  • 3
  • 18
  • 32
7
votes
3 answers

ProLiant DL380p not recognising HP hard drives on boot

I have two ProLiant DL380p rack mounted small factor servers. I have installed the following drives onto both servers: 1x 240GB SSD drive (Crucial NOT HP branded) 2.5" SATA 7.2k rpm 1TB (HP-branded) MM1000GBKAL 2.5" SAS 10k rpm 600GB (HP-branded)…
tommed
  • 299
  • 1
  • 3
  • 10
7
votes
2 answers

Is it possible to enable RAID 1 on an already in-use HP Proliant DL380 G5

I have a HP Proliant DL380 G5 with two HDDs in RAID 0 (Stripe)(72GB+72GB). It has been running Windows Server for quite a while now and has 30GB of occupied space on a stripted volume. I've now purchase two 72GB HDDs more (same as the one's already…
Maxim V. Pavlov
  • 663
  • 3
  • 11
  • 29
7
votes
2 answers

HP ILO utility for Ubuntu - hponcfg fails due to missing hp-ilo package

I'm working with an Ubuntu-based system running on an HP ProLiant DL360p Gen8 server. I prefer to install HP's management agents when I can for full hardware monitoring/configuration capabilities. Per HP's documentation, I added the download tree…
ewwhite
  • 197,159
  • 92
  • 443
  • 809
7
votes
4 answers

one-time PXE boot from Linux on HP Proliant hardware

So, I use Systemimager to provision new CentOS 5.3 hosts via PXE. We have a couple servers that are just test targets that we'll reimage a couple-dozen times a day, and normally, getting them to PXE-boot is as simple as logging onto their iLO…
law
  • 1,490
  • 3
  • 11
  • 11
7
votes
2 answers

Install Oracle Linux 6.4 on HP ProLiant DL380e Gen8 server

installation does not detect the raid 1 logical drive created from ACU. the installation shows the two 2T disks, and after the installation is complete, I can not boot up to the system. I have been searching, and I am looking for the right…
L1opardo
  • 339
  • 2
  • 5
  • 9
7
votes
2 answers

Proliant ML310e Gen8 Smart Array Predicted Failure Issue with SSD

This is a question related to this one: Third-party SSD solutions in ProLiant Gen8 servers but not covered by the question or the answers. I have an OCZ 120 gig SSD as system drive on a Proliant ML310e Gen8 server, sitting on SATA port 6. In order…
Huntrods
  • 237
  • 2
  • 10
7
votes
3 answers

3rd party SSD drive in HP Proliant server only shows 3G transfer speed

After receiving some excellent advice in a previous question, we've bought a OWC Mercury Extreme Pro drive for use in our HP Proliant DL360 G7 server. Both the drive, and the P410i array controller, will apparently support a 6Gb/s…
KenD
  • 1,147
  • 2
  • 17
  • 37
7
votes
2 answers

Fail to install Fedora 18 from flash drive (Warning: /dev/root does not exist)

I'm trying to install Fedora 18 on an HP DL 180 G6 with no luck so far. Please don't suggest installing/using Centos as we have a requirement to use Fedora 18. I have tried using two different USB flash drives with various iso images (DVD full,…
B14D3
  • 5,188
  • 15
  • 64
  • 83
7
votes
3 answers

What is the name of this screw? (from HP ProLiant quick-deploy rail kits)

I need the name of the screw for the HP quick deploy rail kit. The screw clicks into the square holes of the rack. It is a Gen4 Rail kit but the screw is like the Gen8 Rail kit ones. I called HP support, but they couldn't really help me.…
kockiren
  • 886
  • 3
  • 14
  • 37
7
votes
1 answer

replace controller, add second controller, or use expander?

I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC module. The drives installed are SFF 6G 10K drives. I…
longneck
  • 23,082
  • 4
  • 52
  • 86
7
votes
5 answers

ML350 G5 - upgrade hot swap drives to 6 Gb/s?

I support a non profit. They got an ML350 G5 donated to them and I immediately put it to good use for them :) It came with four HP 300GB 15K SAS drives - and of course, they have all now failed. I have been replacing the drives and they are all…
EricEE
  • 73
  • 6
7
votes
2 answers

HP ProLiant DL380 G4 SATA support?

I'm planning to get a second hand HP Proliant DL380 G4 and setup it as storage server, probably using NexentaStor and setup a ZFS system. But now I wonder does DL380 G4 can be convert or support SATA hard disks? SCSI hard disk will not be enough…
hoon
  • 71
  • 1
  • 2
7
votes
2 answers

Convert a Smart Array RAID5 array to a RAID6 (ADG) variant

I have an HP MicroServer (N36L) with a SmartArray P410 controller, a 512MB BBWC unit and four (4) 2TB disks connected. Three of those disks are configured as a single RAID5 array and one is left alone. I'd like to migrate the RAID5 array to a RAID6…
pjsawicki
  • 71
  • 1
  • 1
  • 3