Questions tagged [pci-express]

PCI Express (Peripheral Component Interconnect Express)

PCI Express (Peripheral Component Interconnect Express) is a computer expansion bus standard designed to replace the older PCI, PCI-X, and AGP bus standards. PCIe has numerous improvements over the aforementioned bus standards, including higher maximum system bus throughput, lower I/O pin count and smaller physical footprint, better performance-scaling for bus devices, a more detailed error detection and reporting mechanism, and native hot-plug functionality. More recent revisions of the PCIe standard support hardware I/O virtualization.

Source: wikipedia

132 questions
0
votes
1 answer

Possible to use SAS-2 and SAS-3 HBA in the same system?

I'm wondering if it is possible to use a SAS-2 HBA in a "SAS-3" system. I have a Supermicro X11DPH-T and have attempted to install an LSI 9201-16e. From what I understood (which may be wrong), a PCIe 2.0 card may be installed in a PCIe 3.0 slot,…
Liczyrzepa
  • 455
  • 4
  • 13
0
votes
1 answer

Configure single LTO tape drive over Fiber Channel HBA

How do you set up a single tape storage drive over an FC HBA? As far as I can tell, these things are not "plug and play". The tape drive I bought is an lto-5 FC taken from a tape library. I have everything on and plugged in, but I am not seeing the…
teziroct
  • 1
  • 2
0
votes
2 answers

HP ProLiant DL380 G6 GPU installation

I have a Proliant DL380 G6 and I want to build a Graphics card into it. To be specific, it is a GTX 960 from Asus. The card When I now want to build it in, I am pretty shure I need a pcie slot riser, which one would you recommend? And also, can I…
0
votes
1 answer

Internal HDD keep being dropped

I own a server on which I run flexraid and since a couple of weeks, I get the issue that whenever the server is doing some heavy operations on the RAID, one or more harddrives get dropped. In order to investigate where the problems originate from I…
Jaspack
  • 119
  • 1
  • 4
0
votes
1 answer

PCI Express 2.0 x16 vs 3.0 x8

Will a PCI Express 2.0 x16 graphics card fit in a PCI Express 3.0 x8 slot, and if so, will it affect the performance? Theoretically I take it the two configurations should be equal with respect to bandwidth?
Jay
  • 199
  • 1
  • 9
0
votes
0 answers

Using non-FUJITSU 10Gb Ethernet Cards in FUJITSU servers

We are currently trying to upgrade old servers to 10Gb connections. The servers in question are: PRIMERGY RX200 S6 PRIMERGY RX300 S5 Our FUJITSU partner told us that there were no cards available by FUJITSU. There seem to be cards available by…
taalas
  • 101
  • 1
0
votes
3 answers

Dell Poweredge R620 PCIe Training error what to do?

After the startup, the server show the "PCIe Training error :Integrated RAID" And then "PCIe express error interrupt at F000:B891" My thought is that the controller raid is broken Any help?
ale rep
  • 1
  • 1
  • 1
0
votes
1 answer

Can a standard PCIe card fit on top of VLP (Very Low Profile) memory?

I am dealing with a motherboard https://b2b.gigabyte.com/Server-Motherboard/MZ31-AR0-rev-1x#ov where multiple memory slots are situated right in front of several PCIe slots and hence a full-length PCIe card would not fit when populating the…
Matt
  • 322
  • 6
  • 15
0
votes
1 answer

Only one link comes up on dual PCIe 10-Gigabit card

Background A server running Ubuntu 16.04 Dell X520 (based on Intel's 82599) is connected via PCIe ixgbe driver was installed from here and comes up at boot Issue The card is recognized by the driver - but only one link is being set up, i.e.…
0
votes
1 answer

Compatibility criteria between PCIe component and the motherboard

I have a Gigabyte (GA-B85-HD3 2.0) motherboard and an LSI SA9201-16e, however am not seeing the BIOS configuration menu for the card on boot. The motherboard only has one PCIe slot that can accept the card (8x 2.0), the graphics card slot (16x 3.0).…
J Collins
  • 211
  • 2
  • 9
0
votes
1 answer

Change the NUMA node where a PCIe device is attached

Modern servers using multiple physical CPU sockets have NUMA. PCIe devices are attached to one specific NUMA node as the PCIe controller is embedded in the physical CPU chip. Is it possible to change the assignment of the PCIe device from one NUMA…
Mircea Vutcovici
  • 17,619
  • 4
  • 56
  • 83
0
votes
1 answer

Can I connect a PCIe 2.5" SSD to a regular PCIe 3 slot?

I'm looking to upgrade my server's storage. It currently has SATA SSD storage but I would like to add to it an even faster PCIe3 SSD. It's a full tower with a few empty PCIe3 slots but no PCIe3 backplane, the motherboard model is Supermicro X9DR3-F.…
ytoledano
  • 173
  • 1
  • 2
  • 8
0
votes
0 answers

PCIe link is not up?

I have purchased a P4080 PCIe board from freescale which is in PCIe form factor. According to the documentation, if I connect the device into the motherboard PCIe slot and then turn it on after PC has booted up, looking at it's output from serial…
saman
  • 1
  • 1
0
votes
1 answer

TP-Link TG-3468 on an IBM x3850 M2

I got a networks card from TP-Link. It is the TG-3468. I wanna place it into my IBM server x3850 M2. It has PCIe x8 slots. The slot is a little bit longer than the lenght of the card, but it fits. Also the BIOS shows, that there is an ethernet card…
rudolf97
  • 111
  • 3
0
votes
1 answer

Will a 12.28" x 4.2" x .68" PCIe card fit in a Dell R510?

I am planning for a phone server and plan to get a Dell R510 to house two Asterisk 2400 series PCIE cards. (model 1AEX2406EF to be exact). I know the card is 12.28" x 4.2" x .68" (31.19 x 10.67 x 1.72 cm) and it will work in PCIe slots with 4x 8x…
MicDunDee
  • 15
  • 1
  • 6
1 2 3
8 9