Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [linksys]

Linksys is a line of consumer and SOHO networking gear sold by Cisco Systems.

Linksys is a line of consumer and SOHO networking gear sold by Cisco Systems.

86 questions
2
votes
2 answers

Linksys wireless NIC won't reconnect after coming out of hibernate

I recently bought a Linksys WMP110 wireless PCI NIC for my XP machine. It works fine, except when I take it out of hibernate it sometimes won't reconnect or even see any wireless networks. I have to reboot for it to work again. I figured there might…
Chris Tybur
  • 131
  • 5
2
votes
2 answers

What is the default username and password for the Cisco SPA-942?

I can't seem to find the default admin username and password for the web administration interface for the Linksys/Cisco SPA-942 VoIP phone. What is it?
Justin
  • 915
  • 3
  • 13
  • 26
2
votes
5 answers

Linksys WRT54G - Which firmware is best for sharing internet connections with several seperate offices?

I am looking into buying a Linksys WRT54G series to use as my router, DNS and Firewall. I would like to be able to share my internet connection with a couple of other small organisations too and have control over the management of such a…
Jon
  • 171
  • 1
  • 9
1
vote
1 answer

Upgrade firmware on a Linksys/Cisco RV082 from Mac OS X client

I'm trying to upgrade the firmware on a Linksys/Cisco RV082 router using Mac OS X and it's not working. The current firmware version is 1.1.6.14 (Jul 28 2005 18:12:59), and I've tried upgrading to both 1.3.98-tm (Jun 20 2008 18:37:29) and…
Matthew Rankin
  • 1,175
  • 5
  • 15
  • 32
1
vote
1 answer

OpenVPN client on OpenWRT not routing traffic through VPN on Linksys WRT3200ACM

I am unable to get the traffic routed through the VPN tunnel, when using OpenVPN on OpenWRT firmware. The router is a WRT3200ACM, connecting to OpenVPN server on Ubuntu. OpenVPN client is connecting and I am able to ping ip's on the the remote…
Gunnar
  • 121
  • 1
  • 3
1
vote
2 answers

What's the purpose of setting the static IP entries in a Linksys RV082 router?

I'm wanting to configure our Linksys RV082 wired router as our primary DHCP server and then have our Linksys WRT54G wireless router as a secondary DHCP server. My plan is to have them serve different ranges of IPs as shown below (showing host…
Matthew Rankin
  • 1,175
  • 5
  • 15
  • 32
1
vote
0 answers

Connecting wireless router to sonicwall firewall

I have no idea what I'm doing and I don't have time to learn about it. I need a quick fix and am out of options so I am sorry if this post breaks the rules, I have done my due diligence in searching for a similar question but they all have the same…
Johnny
  • 11
  • 4
1
vote
3 answers

How to "bridge" two separate peer-to-peer subnets together?

Here is what the network looks like: Network A is 192.168.116.X , subnet 255.255.255.0 Network B is 12.32.8.X , subnet 255.255.255.0 There are no routers present in either of the network schemes. All routing is done through unmanaged switches and…
Eminent
  • 13
  • 3
1
vote
1 answer

Linksys LRT224: 400 Bad Request when exporting OpenSSL client configuration file

I setup an OpenVPN client configuration on my Linksys LRT224 but when I try to "Export Client Configuration", the browser shows a blank page with "400 Bad Request - Your client has issued a malformed or illegal request."
Benoit Blanchon
  • 201
  • 2
  • 6
1
vote
0 answers

Routing with Two Subnets - Azure VPN to RRAS (inside WRT1900AC Network)

In my network I have a Linksys WRT1900AC Router and a Microsoft RRAS VPN Server. The local LAN address is 10.10.1.0/24. In Azure, I have a Network that has a VPN connection to my RRAS VPN Server inside my network, but I am forced to use a…
billsecond
  • 199
  • 9
1
vote
1 answer

Router Linksys RV042 WAN2 problem

I've got a brand new Linksys RV042, firmware 1.3.12.6-tm, completely factory configuration, and the WAN2 port doesn't appear to work - it never gets an IP address. I've got a DSL and Cable connection, either work plugged in to the WAN1 port, neither…
Tavo
  • 21
  • 3
1
vote
2 answers

Linksys WRT54Gx as Repeater Bridge

I have a Linksys WRT54Gx router with DD-WRT software working fine. But. Is it possible to use it as a Repeater Bridge when the host router isn't configured to be in the default 192.168.1.1 subnet? I've set everything from these instructions. I've…
Robert Koritnik
  • 912
  • 5
  • 19
  • 35
1
vote
2 answers

LinkSys RV042 Dual WAN Router: Utilize backup link in Smartlink mode

I have a LinkSys RV042 Dual Wan Router in my office. I am using it in smartlink mode, so that when primary fails, the backup link takes over. The problem is that backup link is highly under-utilized. I have a dev machine that periodically…
sharjeel
  • 199
  • 1
  • 11
1
vote
2 answers

routing back to LAN from RV082

We have an RV082 Linksys/Cisco router with a normal configuration of the WAN port connected to the internet, and the LAN port configured as 192.168.188.1. This might be a simple question, but I have never tried it before. We are going to connect…
charnley
  • 577
  • 3
  • 14
1
vote
1 answer

Cisco SLM248G Switch Hardware Reset

We have two Cisco SLM248G switches within our environment. After some research, it seems that one is causing a few problems because during heavy loads, it is sending transmissions to our firewall (Cisco RV082), causing it to reset frequently. I…
Sean
  • 313
  • 2
  • 8
  • 19
1
2
3 4 5 6