Questions tagged [ipv6]

IPv6 is the successor to IPv4. Rather than 2^32 addresses (like IPv4), it has 2^128, which is 340,282,366,920,938,463,463,374,607,431,768,211,456 unique addresses (34 undecillion). IPv6 addressing is quite different to IPv4 and is not backwards compatible, but protocols that sit on top (HTTP, SSH, etc) remain unchanged.

was designed in the 1970's and supports just over 4 billion unique addresses. Back then, nobody could ever have imagined the internet becoming what it is today.

Since 1 February 2011, the global pool of IPv4 addresses has been depleted, The first regional pool (Asia) ran out on 15 April 2011, Europe ran out on 14 September 2014, with the North American pools slated to run out in. Individual ISPs and hosting companies should have between three and twelve months after their regional pool is empty. By 2014, it will be hard/expensive to get a new IPv4 allocation outside of Africa and Latin America.

In the early 1990's people started to realise that we were going to run out of IP addresses and a taskforce was developed to decide on a new protocol. The protocol that was settled on was IPv6.

IPv6 has 128-bit addresses, and mostly works the same as IPv4, except that ARP is completely replaced (by Neighbour Discovery Protocol), and DHCP is radically different - and may not be necessary, in the light of the new Router Advertisement system. With the much larger address allocation, NAT is not needed.

There is an excellent talk from DefCon 18 on youtube that explains a lot of the history around IPv6. You can find it here.

1755 questions
0
votes
0 answers

How do I ping6 VM player?

I need to ping6 VM player(Ubuntu).In VM player, On sudo ifconfig I see inet6 addr: fe80::20c:29ff:fe73:e5f6/64 On trying ping6 from host(Ubuntu) ping6 fe80::20c:29ff:fe73:e5f6/64 It shows unknown host How do I successfully ping6 my VM…
0
votes
0 answers

How to make a zeroconf ipv6 connection between two cabled PCs

I have a Win7 embedded system that has a Ubuntu 16.04 peripheral. They are connected by an ethernet cable and the Ubuntu host can't be allowed to connect to anything but the Win7 host. The Win7 host is multihomed, with an Internet connection through…
John P. Fisher
  • 490
  • 4
  • 9
0
votes
1 answer

IPV6 - private IP not working

I have an apache server with a simple php file echo "hello world!"; and when I try: http://[127.0.0.1]:8000 working fine http://[192.168.1.2]:8000 working fine http://[::]:8000 working fine http://[fe80::b00:24ff:fe62:5fa4]:8000 not…
Ricardo
  • 147
  • 1
  • 8
0
votes
1 answer

PFSense refuses IPv6 Gateway Config

I am configuring a PFSense box to use as a firewall. It's config should be: IPv6 address: 2a01:4f8:a0:241b::1 Gateway: fe80::1 But when I try to add this gateway in the gui, PFSense refuses and tells me it cannot do this: And when I use the CLI it…
kazaamjt
  • 145
  • 2
  • 15
0
votes
0 answers

sendmail error while IPv6&STARTTLS configuration

I'm configuring sendmail with STARTTLS(Client certificate) over IPv6 network. When my client try to send mail, I recieved the following messages. Client side : Sending of the message failed. The message could not be sent because the connection to…
nyanye
  • 1
  • 4
0
votes
1 answer

Missing lots of ipv4 traffic after dns switch to a new server

I've been migrating a traffic-heavy (https://jsonip.com) service I've run for a number of years to an upgraded server over the last week. Before the dns switch, I was averaging 9mb/s ipv4 inbound. After the switch, its barely 1mb/s on the new…
Geuis
  • 637
  • 3
  • 8
  • 20
0
votes
1 answer

Why is my host not receiving packets sent across tun0?

I have a tun0 interface set up which allows packets to be sent as such: HOST (aaaa::1) ----> tun0 ----> SLIP ----> Router (aaaa::200:0:0:1) The router receives the packets, and can send back a webpage (it has a small webserver on it), which I can…
mbadd
  • 101
  • 1
0
votes
1 answer

IPv6 client accessing IPv4 server w/ IPv6-unaware apps via CloudFlare w/ mod_cloudflare

Our server is currently IPv4 only. However we are using CloudFlare in front of it, and we would like to take advantage of the IPv6 compatibility it offers. In the same time we have some applications on the server which are not aware of IPv6 (like…
Chris Dev
  • 117
  • 6
0
votes
1 answer

How to use native ipv6 together with 6to4? I got lost packets

I've found that I can't run native IPV6 interface (at eth0) with 6to4 tunnel (at tun6to4) together. Here's my setup (/etc/network/interfaces/): auto eth0 auto bond0 iface eth0 inet static address 57.164.26.201 netmask 255.255.255.0 …
WebSurfer
  • 1
  • 1
0
votes
0 answers

Can IPv6 connectivity between countries be unreliable?

I’m setting up IPv6 on my existing VPS and backup server. The VPS is located in Fremont on Linode, and the backup server is located in New Zealand. I have several VPSs within the Fremont data center. The VPSs are set up using systemd-networkd and…
ioquatix
  • 101
  • 2
0
votes
2 answers

setting IPv6 address for domain

I am quite new to the server business and I was wondering about a thing with the IPv6 addresses: When I assign an IPv6 address for my domain as an AAAA record: Do I assign a /64 address or do I assign a complete single address out of the /64 that I…
hurrtz
  • 103
  • 2
0
votes
1 answer

IPv6 connection between 2 computers doesn't work

I have 2 Linux computers with the following IPv6 addresses: 1: fe80::de0e:a1ff:fe15:13e0 prefixlen 64 2: fe80::2e0:4cff:feb0:f8d prefixlen 64 When on the first computer I try: # ping fe80::2e0:4cff:feb0:f8d ping: unknown host…
user4035
  • 135
  • 1
  • 7
0
votes
1 answer

IPv6 Subnet Delegation

I'm a bit confused on how to calculate IPv6 numbering. I have a /32 now and a VPN client that wants 6 x /48 from that /32. Could someone please simplify on how I can determine the points of the /32 for the request? I tried a subnet calculator online…
Cazzette
  • 63
  • 1
  • 11
0
votes
1 answer

why teredo IP Address keep changing?

I managed to configure teredo on windows 7 but I come up with one problem ... teredo IP address keep changing . I noticed that terendo stat keep change too , it moving from dormant to enabled and vica versa when I run (ipconfig /all) it give me…
0
votes
0 answers

IPv6 not working

I'm unsure as to why this is happening... anyway, let me start from the beginning The Setup 1 * Dedicated server with a /29 IPv4 and /48 IPv6 (from Nocix (DataShack)) 1 * CentOS 7 KVM host 1 * CentOS 6 guest The Problem I have the /48 my provider…
td512
  • 133
  • 1
  • 7