Questions tagged [ipv6]

IPv6 is the successor to IPv4. Rather than 2^32 addresses (like IPv4), it has 2^128, which is 340,282,366,920,938,463,463,374,607,431,768,211,456 unique addresses (34 undecillion). IPv6 addressing is quite different to IPv4 and is not backwards compatible, but protocols that sit on top (HTTP, SSH, etc) remain unchanged.

was designed in the 1970's and supports just over 4 billion unique addresses. Back then, nobody could ever have imagined the internet becoming what it is today.

Since 1 February 2011, the global pool of IPv4 addresses has been depleted, The first regional pool (Asia) ran out on 15 April 2011, Europe ran out on 14 September 2014, with the North American pools slated to run out in. Individual ISPs and hosting companies should have between three and twelve months after their regional pool is empty. By 2014, it will be hard/expensive to get a new IPv4 allocation outside of Africa and Latin America.

In the early 1990's people started to realise that we were going to run out of IP addresses and a taskforce was developed to decide on a new protocol. The protocol that was settled on was IPv6.

IPv6 has 128-bit addresses, and mostly works the same as IPv4, except that ARP is completely replaced (by Neighbour Discovery Protocol), and DHCP is radically different - and may not be necessary, in the light of the new Router Advertisement system. With the much larger address allocation, NAT is not needed.

There is an excellent talk from DefCon 18 on youtube that explains a lot of the history around IPv6. You can find it here.

1755 questions
0
votes
1 answer

4in6 tunneling software for Windows

I have a VM running Windows 2008 R2, and I need this VM to connect to a remote site using VPN. The VPN software does not support Windows 2008 R2 or any other 64 bit operating system, so I can't install it on my VM. But then I have another VM running…
Nils Magne Lunde
  • 553
  • 3
  • 12
0
votes
1 answer

how to install nf_conntrack module in RHEL

I tried installing nf_conntrack module in RHEL , it fails [root@boot]# modprobe nf_conntrack_ipv6 FATAL: Module nf_conntrack_ipv6 not found. [root@boot]# modprobe nf_conntrack FATAL: Module nf_conntrack not found. [root@boot]# lsmod | grep -i…
sam
  • 1
  • 3
0
votes
1 answer

Can't enable IPv6 in Cisco 2800 router running IOS 12.4T

I can't enable IPV6 in a Cisco 2800 router that runs iOS version 12.4T. I followed the summary steps section in Cisco's web page . But whenever I type "ipv6" on the command line (as in 'ipv6 address' - Step 4 in the summary steps), I get an error…
Ganesh
  • 117
  • 1
  • 5
0
votes
0 answers

how to enable ipv6 in redhat

can anyone tell me how to enable ipv6 support in rhel i tried sysctl -w net.ipv6.conf.all.forwarding=1 and echo 1 > /proc/sys/net/ipv6/conf/all/forwarding and did service network restart but still i get error Bringing up interface eth0: Global…
sam
  • 1
  • 3
0
votes
0 answers

MikroTik ipv6 Tunnel

I've got a MikroTik router set up with the latest stable OS on it, and I just set up an ipv6 tunnel with Hurricane Electric, but I'm having an odd issue with it. I can't ping anything until I first ping the tunnel endpoint on HE's side. After that…
MikeSmitty
  • 27
  • 1
  • 9
0
votes
1 answer

Deploy Tunneling techniques

I understand about different Tunneling techniques (6to4, ISATAP and Teredo). However, most of papers and books are absent of how to deploy these techniques. For example, if I have a dual-stack router (ipv4/6), how can I install/enable 6to4 or ISATAP…
JoesyXHN
  • 303
  • 1
  • 2
  • 6
0
votes
1 answer

How to attach multiple ipv6 ips to eth1 on debian

I've just got a new server with native ipv6. I want to attach multiple ipv6 ips to eth1, but the only way I can see to do so is to attach them individually: i.e. address 2607:f0d0:xxxx:xxxx::2 address 2607:f0d0:xxxx:xxxx::3 address…
Noodles
  • 1,386
  • 3
  • 18
  • 29
0
votes
2 answers

Connectivity between IPv6 Teredo host and IPv6 6to4 Host

I have two computers. Host 1 is a Debian machine running Miredo (Teredo client) inside of a VirtualBox VPN. The VM host is running under a private IP address space (192.168.0.0). Host 2 is an Ubuntu machine. Host 1 <-> Virtual Host <-> Corporate…
Mike F
  • 350
  • 1
  • 6
0
votes
1 answer

What are the prerequisite on the storage system side in order to use the DirectAccess services from Windows 7 clients?

I would like to know what the cabling/protocols/storage prerequisits are in order to implement the DirectAccess service on Windows 7 Entreprise clients.
waszkiewicz
  • 1,002
  • 3
  • 17
  • 36
0
votes
1 answer

Teredo and IPV6 web servers

I have two different questions, the first one could be stupid. I was reading about IPV6 and ended up in this site http://test-ipv6.com/ that says that I have a public IPV6 with Teredo tunneling. I don't understand if this Teredo is a software…
Sandro Antonucci
  • 183
  • 2
  • 10
0
votes
1 answer

OpenVZ veth interface error

I'm trying to setup my openvz containers to use a veth interface. I have veth1.0 on the host node and I see eth0 in the vz. but when I do: ip -6 route add 2001:249a:aaa1:0000:0000:0000:0001:0001/112 dev veth1.0 on the host node and i type ping6…
Daniel
  • 135
  • 1
  • 3
  • 17
0
votes
1 answer

Incorrect default gateway listed across entire domain

Our DC is a Win2k3 box that also does DHCP for the domain. I was having some network issues the other day that turned out to be DNS related and resolved those. Anyway, when I was running diagnostics I noticed there were multiple default gateways…
Diffuser
  • 138
  • 6
0
votes
3 answers

postgres - sharing same pg_hba.conf between IPV4 system and IPV6 system

I am trying to package postgres from one machine to another. The source is windows 7 with IP V6 and target is windows XP with IPv4. Starting postgres on windows XP gives error 2010-11-01 12:01:07 IST LOG: invalid IP address "::1": Unknown…
Jayan
  • 141
  • 1
  • 5
  • 14
0
votes
1 answer

Assign IPV6 to external vps/clients

I have about 4 billion IPV6 ips, i'd like to assign some to one of my external vpses not in the same D.C, the ipv6 ips are on a VPS too running ubuntu 10.04 How can i do this? E.G assign 10 ipv6 ips on my VPS to another External VPS, so that…
Daniel
  • 135
  • 1
  • 3
  • 17
0
votes
2 answers

Using radvd to advertise ipv6 over VPN connection using DD-wrt

My ultimate goal is to allow VPN users to have access to my internal IPv6 network from across the intertubes. I've got a linksys WRT54GSv2 running DD-WRTv24SP1 and have configured the little guy as specified here…
Sean Madden
  • 103
  • 2
1 2 3
99
100