Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [ilo]

iLO typically stands for 'Integrated Lights-Out" which is a form of out-of-band management interface for HP Server products.

iLO typically stands for 'Integrated Lights-Out" which is a form of out-of-band management interface for HP Server products.

For more info:

202 questions
1
vote
1 answer

ILO/DRAC like device for desktop

Does anyone know if there is some price friendly hardware like HP ILO/Dell DRAC for desktop PC (home server)? I prefer PCI/PCIe form. All I need is access to COM port and remote power cycle. Thanks in advance.
user106666
1
vote
1 answer

HP iLO2/3 cli: send NMI

I want to send a Non-Maskable Interrupt (NMI) to the system over the HP iLO2/3 cli. Unfortunately I don't know the correct syntax or target: hpiLO-> nmi status=2 status_tag=COMMAND PROCESSING FAILED error_tag=COMMAND SYNTAX ERROR You must specify…
Milde
  • 151
  • 1
  • 1
  • 6
1
vote
1 answer

DL380 G7: Not able to access ILO on DL380 via ssh from a client

I have problem where I can't access my ILO(ssh to ILO IP) thru client which is in different network.I am able to ping ILO IP thru this clinet but ssh access is not possible. Is it possible to have ssh to ILO IP from a client which is in different…
user117140
  • 9
  • 1
  • 1
  • 6
1
vote
1 answer

Can I setup static routes through ILO card?

I am setting up a network and I have an HP Blade 380 G7 server with its own ILO module. I am going to be giving users access to this box and have segmented the ILO card off. I am wondering 2 things. 1.) I am an administrator on box can I use the…
user116180
  • 11
  • 2
1
vote
1 answer

HP Proliant 380 G4 iLO stuck in recovery mode

The iLO interface on this server is stuck in recovery mode. I've tried flashing the firmware via FTP per the iLO manual. It seems like the flash succeeds & the iLO interface resets, but it comes back up in recovery mode. System Management…
churnd
  • 4,077
  • 5
  • 34
  • 42
1
vote
1 answer

Entering BIOS via HP iLo2 remote console

I want to enter BIOS remotely via HP iLo2 remote console. However, I tried to press F8,F10,Esc-8 and Esc-10. None of them works. Could someone teach me how to do so? Thank you. Regards, yuwen
yuwen
  • 13
  • 1
  • 1
  • 3
1
vote
2 answers

Power management over IPMI and HP iLO2

I tried to reboot server over IPMI and the integrated service processor/BMC. It worked for IBM server with an Integrated Management Module (IMM), but failed with HP iLO2 (FW v2.05). I used ipmiutil.exe for Windows so far and would be able to use…
Milde
  • 151
  • 1
  • 1
  • 6
1
vote
6 answers

How setup iLO remotely

I was used to configure HP iLO from Windows OS using hponcnfg, but how it can be done when operating system is ESXi 4.1 without phisically connect to the iLO port (aka remotely)? Thank you all for help
Danilo Brambilla
  • 1,031
  • 2
  • 15
  • 33
1
vote
1 answer

Broken Signature Prevents Update of the Firmware on HPE Gen10

A HPE Gen10 server could not update from ILO 5 version 2.10 to the current one. I tried the ILO webinterface and the local update function. The signature was not correct. Even after manually downloading the .bin file the signature was not accepted…
Jonas Stein
  • 406
  • 5
  • 14
1
vote
1 answer

How to connect to the ILO HP Dl380p gen8

Followed the below steps as per https://support.hpe.com/hpesc/public/docDisplay?docId=a00039812en_us&docLocale=en_US#N1006B So I do not have a display to the server and trying to use my windows laptop as display. As per the above link the default IP…
m.jack
  • 11
  • 2
1
vote
4 answers

Cannot connect to the IPMI (iLO 4) from the same server

I have an HPE DL380e G8 server running Proxmox and I can't connect to iLO 4 neither from the web page nor from SSH when trying to connect from the same server (or when connecting from outside the network using a VPN tunnel hosted on the same…
alex3025
  • 27
  • 2
  • 9
1
vote
1 answer

run multiple commands in oneline (like in linux **date && ls**) in **HP iLO3 ssh console

i want to run multiple commands in oneline (like in linux date && ls) in HP iLO3 ssh console, but it (&&) not works. How i can do it? I not found it in documentation i want run 2 commands by sh script: cd /map1/firmware1 && show /map1/firmware1 but…
mocart
  • 121
  • 1
  • 5
1
vote
3 answers

iLo4 and AlmaLinux\Centos8 do not work properly

I have a HP DL360p G8 and I have updated all firwamres such as Bios, iLo and .. to the latest version but problem is when I open Virtual Console i can work with first connection and when I close that session and reopen it later I see this…
Blackmetal
  • 105
  • 4
1
vote
2 answers

How to reset iLO 4 to default without credentials?

Is there a way to reset iLO (in order to see system health and configuration details) with just a keyboard and a display (no web interface)? If a web interface is an absolute must, then how to reset iLO without knowing the IP address and…
rbaleksandar
  • 113
  • 1
  • 8
1
vote
1 answer

Modifying HPE Proliant thermal settings

HPE states that from iLO 4 version 2.76 user can view and modify system thermal configuration settings using iLO interfaces. Finally! This is great feature for example those who have HPE incompatible drives. More details about this issue can be read…
Timo Ylikännö
  • 33
  • 1
  • 5
1 2 3
…
13 14