Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [ilo]

iLO typically stands for 'Integrated Lights-Out" which is a form of out-of-band management interface for HP Server products.

iLO typically stands for 'Integrated Lights-Out" which is a form of out-of-band management interface for HP Server products.

For more info:

202 questions
0
votes
2 answers

Monitoring processes/services Error by Zabbix over HPe Server

Would you mind sharing your experience with me? I monitor the ilo HP server with Zabbix Whenever there is a problem with the RAM or hard disk on the server, I receive a critical alarm through this OID. 1.3.6.1.4.1.232.6.1.3.0 It's just that, even if…
sasanalem
  • 1
  • 1
0
votes
2 answers

How can I update HP iLO 4 Card firmware without a web interface

I have a HP ProLiant DL580 Gen 8 Server with an iLO Card giving me an "Error 270 - Unable to communicate with iLO firmware". So I am attempting to connect to the iLO port to upgrade/reflash the firmware but am having trouble connecting since the…
Cameron A
  • 11
  • 1
  • 4
0
votes
0 answers

iLO Linux Installation stuck due to "Unable to find any valid media"

Good Morning All, I'am a dummy in this area and I am trying to install Linux Red Hat 8.3 on a remote machine with HP iLO 5; the features of the remote machine are the folowings: Company: HPE Product Name: ProLiant DL385…
stefano
  • 1
0
votes
0 answers

HP ProLiant ML350p - when does a status code indicate an actual issue even when iLO does not mention any?

I've recently purchased the above mentioned server. It boots fine, it even has a Windows 10 installed on it (unknown password, will replace with RHLE anyway). iLO4 doesn't show any issues at all (except the infamous problem Embedded Flash/SD-CARD:…
rbaleksandar
  • 113
  • 1
  • 8
0
votes
1 answer

HPE SSA: After completing the configuration - reboot the system

From the HPE ProLiant System Utilities (BIOS) I booted into HPE Smart Storage Administrator (SSA) to migrate a logical drive with RAID6 (and existing data) to RAID5. After starting the migration task, which would need several hours to complete, the…
stackprotector
  • 596
  • 1
  • 8
  • 27
0
votes
0 answers

Problematic installation of AlmaLinux/CentOS

I am trying to install AlmaLinux/CentOS 8 on a new HP ProLiant DL360p Gen8 server via iLO 4 (firmware version 2.77) Everything seems to be ok; and I can even see the typical interactive anaconda installer screen which asks if I want to test my…
youdsmedia
  • 111
  • 4
0
votes
1 answer

HP Proliant DL380 Gen9 iLO connectivity

I'm trying to install windows on a recently purchased (used) HP Proliant DL380 Gen9 server but I do not have a monitor to connect to the server to guide the installation. The only way to do it is through ILO, however the server has 2 ethernet built…
Maya
  • 123
  • 2
  • 5
0
votes
0 answers

HPE ProLiant DL380e Gen8 - ILO seems OK but server does not power up

I have an HPE ProLiant DL380e Gen8 rack server. I can't make the server power up. It stays "silent". The ILO 4 web interface works fine and it shows status: System Health: [tick] OK iLO Health: [tick] OK Server Power: OFF I don't see any problems…
MrSnrub
  • 153
  • 1
  • 3
  • 9
0
votes
1 answer

How to reset the ilo5 factory generated password using API ? or ilorest Tool from remote machine?

I have multiple HPE Gen10 servers which have ILO5 license. Now I want to manage the server from remote system using API or HP ilorest Tool, but to authenticate, it requires a password of user administrator & it comes as tag on the server. It's a…
Bharat Gupta
  • 1
  • 1
-1
votes
1 answer

Connecting Blade OS to Internet with Cisco 3020 Switch Module

I am very new to server networking, and appreciate any help. I have an HP c7000 with Proliant G8 blades. I have installed RHEL, Centos, and Windows Server on different blades, trying to get any of them to connect. I have 4 Cisco 3020 switch modules…
Mike B
  • 9
  • 1
-1
votes
3 answers

HP DL380 G5 server BIOS Upgrade interrupted and no longer booting

Whilst in the middle of doing a maintenance CD and iLO upgrade via the iLO on a HP DL380 G5, lost connectivity to the server. After this point unable to contact the iLO. Will not ping. Unplugged all cables, power, ilo, kvm and other network cables.…
Mouse
-1
votes
1 answer

Not getting the console login prompt in HP ILO 3

Not able to get the console login in the ILO 3. When I am entering the vsp command in the ilo it is not showing the console login prompt. Tried to reset the ilo(from the Diagnostic Option in the Web GUI) but still the console login prompt is not…
Nishit Shah
  • 1
-1
votes
1 answer

iLO and server through same external IP

I have a HP ProLiant server which supports iLO. Also I have some services running on that server. Now, I only have one external IP address available, initially I wanted to use that IP address for a VPN to my server, but I cannot create to a server…
J van Amerongen
  • 1
  • 2
-1
votes
1 answer

HP ProLiant - Does ILO 2 Advanced offer additional SNMP or IPMI features?

We've got ML350 G5 servers with iLO 2 standard license. Does upgrading to higher iLO license will unlock new SNMP or IPMI data registers? If it will, which ones?
user211435
  • 31
  • 2
-1
votes
1 answer

How can I get haproxy to completely ignore SSL handshake errors?

Scenario: I have an old hp dl360 g7 with iLO 3. Modern browsers can't access it because it uses ancient ciphers. On my internal network, I'd like to have haproxy talk to it and eat the SSL errors and serve the content with SSL that modern browsers…
Matt
  • 141
  • 7
1 2 3
…
13
14