1

The iLO interface on this server is stuck in recovery mode. I've tried flashing the firmware via FTP per the iLO manual. It seems like the flash succeeds & the iLO interface resets, but it comes back up in recovery mode. System Management Homepage doesn't see the Management Processor & (needless to say) hponcfg doesn't either. Is there anything else I can try to get it working?

masegaloeh
  • 18,236
  • 10
  • 57
  • 106
churnd
  • 4,077
  • 5
  • 34
  • 42

1 Answers1

1

Old server. Is there any chance you've had system board issues previously? Have you looked at the motherboard battery?

ewwhite
  • 197,159
  • 92
  • 443
  • 809
  • It's going to be decommissioned soon & I don't want to replace the motherboard if I don't have to. SIM reports everything else is fine, so I think the mobo batt is prob OK. – churnd Mar 29 '12 at 20:46
  • Try clearing NVRAM, checking the system maintenance DIP switches and removing power for an extended period of time and powering back on. – ewwhite Mar 29 '12 at 20:56