Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [ibm]

IBM is a computer hardware and software vendor operating in a variety of market spaces, including Unix systems, "midrange" (AS/400) systems, Mainframes, and consumer workstations/laptops. This is a generic tag designed to be used if no more specific tag exists for your IBM product. See the partial list of IBM tags in the full tag wiki

The IBM tag should only be used if no more specific tag exists for your IBM product. Some tags you might consider instead include:






417 questions
2
votes
0 answers

Any equivalent of Entitled Capacity in x86 systems

I've been reading a lot about IBM POWER systems lately and I've been wondering if there is any equivalent to their Entitled capacity concept in x86 architecture. Basically allowing virtual partitions to use more CPU cores than they've been assigned…
Morish
  • 21
  • 1
2
votes
1 answer

Slow SSD performance - IBM X3650 M4 (7915)

I set up a test environment for development purposes. It consists of a IBM X3650 M4 (7915) server with: 2 x Intel Xeon E2690 @ 2.90GHz 96GB 1333MHz ECC RAM 2 x HDD 146GB 15k rpm 6 x SSD 525GB (Crucial MX300) embedded ServeRaid m5110e in JBOD mode…
pietrop
  • 179
  • 8
2
votes
1 answer

IBM's iSeries ODBC driver not sending any traffic when invoked via isql or otherwise, getting [08S01][unixODBC] and [ISQL]ERROR: Could not SQLConnect

Note: I've replaced IP addresses, database names, and server users with examples. That shouldn't affect anything. The Setup I've installed unixODBC (yum install unixODBC) and IBM's official iSeries ODBC driver (yum install…
Agop
  • 121
  • 1
  • 6
2
votes
1 answer

How do I customize or replace the default landing page (servlet page) for IBM traveler?

When a user accesses https:/// and is redirected to https:///traveler after providing a correct username and password, They are presented with a basic information page showing their user status. There are also some links to get the IBM verse…
paul sullivan
  • 125
  • 5
2
votes
0 answers

SNMP commands for IBM server

I’m trying to get some data from an IBM server, for example the temperature using the OID .1.3.6.1.4.1.2.3.51.3.1.1.2.1.1 If I run the command: snmpget -O n -v 2c -c public IP .1.3.6.1.4.1.2.3.51.3.1.1.2.1.1 I get the answer: no such object…
FabriC
  • 21
  • 1
  • 5
2
votes
1 answer

IBM BladeCenter S storage module

I am new to this forum and have a question I'd like to ask. I have a client who is running a BladeCenter S, which includes a 6-disk Storage Module (44Y1405/44E8057). The problem they have is that when they switch the system on, everything is…
Toni
  • 21
  • 1
2
votes
3 answers

LSI megaraid - config raid and non-raid

I have this configuration of server IBM X3650 M4 IBM ServeRAID M5110e 300GB x3 SAS (config as RAID 5) 1TB x1 SAS (config as normal disk, non-raid) Windows Server 2012 R2 Standard I would like the system behave like the following: OS install in…
Neo Ng
  • 51
  • 1
  • 7
2
votes
1 answer

IBM System x3650 M3 - how to expand RAID 10 array

I have RAID 10 array on my IBM System x3650 M3 server - four drives IBM 146GB 10K 6Gbps SAS 2.5". I bought four new drives (also 146GB 10K 6Gbps) because soon I may have problem with free space. Can I expand RAID 10 without losing data? My RAID…
user252249
2
votes
3 answers

Can a Sun rack be converted to a normal rack?

The Sun rack with PN 595-5953-01 does not use the normal rails like HP and IBM uses. Does there exist Sun rails so standard servers can be put in it? Or perhaps those L-shelves, where you lay the servers on the the L-shelves? Update The reason I am…
Jasmine Lognnes
  • 2,520
  • 8
  • 33
  • 51
2
votes
1 answer

How can I reset the Storage Manager password on a IBM DS5020 Storage Array on network using telnet?

I have an IBM DS5020 Storage Array to which the Storage Manager password is lost, but it has been configured on a network and the IP Address is known. How can I reset the password remotely without using the serial port? When I open an rlogin session…
user1071777
  • 151
  • 1
  • 1
  • 7
2
votes
0 answers

IBM Blade Center - Power Consumption with SNMP & IPMI

We have the need to follow and manage the power consumption of each blade, one by one, from our IBM Blade Center system. Is there a way to do this ? Anyhow it’s a licensing upgrade or external/internal module to add on the blade system. Those…
user211435
  • 31
  • 2
2
votes
2 answers

How to Verify if the Websphere Fix Pack was Properly Applied

I installed websphere 7.0.0.0 and it is my first time to apply a fix pack (25) but the web console is not showing 7.0.0.25 instead its showing the following. I tried checking it on command line and obtained the following. I need to update the…
jchips12
  • 123
  • 1
  • 6
2
votes
0 answers

IBM xSeries 306 CPU Speed

I have an IBM xSeries 306. The system has been flawless until a week ago. It's a Pentium 4 Dual Core CPU. The CPU speed is 3.20 gHz. Now, it shows 4.26 gHz or 2.16 gHz when the POST screen comes up. Nothing in the BIOS is user configurable for…
Bob ONeill
  • 69
  • 2
  • 8
2
votes
3 answers

Server memory configuration after upgrade

I have an IBM 346 server that can support up to 16GB of memory. It previously had 8GB installed (8x 1GB slots) and was working fine. I have upgraded it to 16GB using 8x 2GB slots. However now when the server starts now there is a beeping error code…
sa555
  • 144
  • 7
2
votes
2 answers

GPFS quorum and rolling updates

I guess it's something that I am missing although I have read the GPFS documentation. Let's say we have a four node GPFS setup, with three of them acting as quorum. In GPFS > 3.2 we can perform rolling upgrades, but how will that work when there is…
Cobra Kai Dojo
  • 447
  • 2
  • 6
  • 21
1 2 3
…
27 28