Questions tagged [hp-proliant]

Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

ProLiant describes a range of servers originally marketed by Compaq and later, by Hewlett Packard following the merger of the two entities.

  • BL is the prefix for the Blade servers.
  • DL is the prefix for 'dense' rackable servers, and includes the entry-level DL1xx-series, the midrange DL3xx-series, and the high-end DL5xx, DL7xx and DL9xx models.
  • ML designates the expandable tower/rack-capable product line.
  • SL denotes the scale-out product line intended for cloud and high-performance computing.

The second number gives a rough indication of the physical size within a range, and the third number indicates Intel (0) or AMD (5) CPUs: ProLiant DL360 is 1U high Intel-based, DL385 is 2U high AMD CPU(s).

All ProLiant servers also have a generation number, e.g. the DL580 G7 is a later version of and obsoletes the earlier DL580 G5. Note that due to marketing reasons, generation numbers on some models were skipped (for example there was no BL460 G4).

cf. IBM's System X, Dell's PowerEDGE

1203 questions
-2
votes
2 answers

HP proliant SE316M1 G6 drivers for windows server 2008 R2

I have a HP proliant SE316M1 G6 and we have just installed windows server 2008 R2 the machine didn't come with any drivers and i can't seem to download any windows server seems to have found most of the drivers but i have two what are not…
mike
  • 1
  • 1
-2
votes
1 answer

Installing CentOS7 / RHEL 7 on Proliant DL360e Gen8

I found a fix for this after hours of digging on line. Here is the main article i am using for a reference: https://access.redhat.com/articles/118133 The RAID card which comes with this system basically has a proprietary driver for the B320i RAID…
Luke Galutia
  • 63
  • 2
  • 6
-2
votes
1 answer

Server restarted while rebuilding array, what to do?

It's a HP ProLiant DL380 Generation 7, that has four hard drives, one is dead, I suppose that another one is dead too, but is there any way to force the array to rebuild again? The server has restarted while it was rebuilding an array. My windows…
-2
votes
2 answers

HP ProLiant DL380e Gen8 has high fan speed after installing second CPU

Today I installed a second CPU in our HP ProLiant DL380e Gen8, and after booting the fans all went to 99.96%. This causes the server to make an enormous amount of noise. Could it damage the server? What could I do to fix this? I already removed all…
Maarten Ureel
  • 239
  • 2
  • 5
  • 12
-2
votes
2 answers

Hardware RAID0: what happens when a drive fails?

With a hardware-based RAID0, what happens when a drive fails? For example, on brand name servers like HP DL120G7 with HP P410, when running FreeBSD on a zfs with a zpool mirror, or DragonFly BSD with mirroring through HAMMER etc. The following…
cnst
  • 13,848
  • 9
  • 54
  • 76
-2
votes
1 answer

HP DL360p Gen8 for low latency trading - what to upgrade?

I'm using HP DL360p Gen8 for low latency trading (but not ultra-low-latency!). It means that i'm working in frame about "10+ microseconds" and i don't care about "1-5 microsecond" or nanoseconds. I have dual Xeon E5-2640 and HP Ethernet 1Gb 4-port…
Oleg Vazhnev
  • 549
  • 4
  • 13
  • 27
-2
votes
2 answers

High IO latency on ESXi 4.1 on HP DL580 G7

at my Company we were experiencing some weird spikes on IO latency on one of our ESXi instances. we've spend 24h figuring out whats wrong and no clue so far. after giving up we put all the disks into a different server (HP DL380 G7) with much less…
-2
votes
2 answers

Red Hat 5.3 on HP Proliant DL380 G5 and failed drive on RAID controller

I have a development ERP server here in my office that I assist with support on, and originally the DBA requested a single drive setup for some of the drives on the server. Thus the hardware RAID controller (an HP embedded controller) looks…
thinkdreams
  • 187
  • 2
  • 2
  • 8
-2
votes
2 answers

Increase server's logical drive support

I have an HPE ProLiant DL360p Gen8 Server, with one P420i controller. As I read in its specification, the controller's limit is 2 logical drives. What part(s) should I buy in order to increase it to 8 drives?
-2
votes
1 answer

What are the consequences of RAM speed to high on a Proliant DL385 G7?

Rendering the 3D model of an optical lens or mirror with openSCAD can require huge amount of RAM, and for this use, I have maxed the RAM on a Proliant DL385 G7 but the RAMs I got were PC-14900: 1866MHz instead of the required PC-10600:…
Camion
  • 97
  • 1
-2
votes
1 answer

How can I know how many free RAM and CPU slots are on my hpe proliant dl380 gen10 host

I need help with knowing how much free RAM and CPU slots I have on my Proliant DL380 Gen10 server. Is there any software I can deploy to the server that enables me to know what specs do I have on the server? Also I think it is worth mentioning I…
-2
votes
1 answer

Proliant dl585 g5 counts ram then turns off

I recently aquired a proliant dl585 g5 server that I wish to use as a home server As I have been working with pcs for a long time the first thing I did after I had made sure it was clean inside and ready to use was to download the latest bios update…
-2
votes
1 answer

ProLiant DL360 G7 won't boot, Health LED blinking RED, SID has both CPUs in Amber

I have an HP Proliant DL360 G7 that I had working earlier today. It has 2 Xeon 2.4 CPUs and 16GB memory. I had it working fine earlier today as I was installing VMware on system to get it ready for a project. I shut down the system correctly and…
Paul D
  • 1
  • 1
-3
votes
1 answer

Loud Pop from DL380G5--then neither PSU lights up when plugged in

I wanted to fire up my old DL380 G5 server recently, and maybe one second after I hit the power button and the fans started to rev up, I heard a loud pop and suddenly it shut down. Now neither PSU lights the LED near the power cable. The machine…
-3
votes
1 answer

Install new G Skill Ripsaw X RAM into HP Proliant ML10 v2 causes black screen and long beep

So I have a HP Proliant ML10 v2 and 3x4Gb G Skill Ripsaw X DDR3-1600 PC3-12800 1.5V. The computer does not show POST and then proceeds to a long beep. I removed the new RAM and boot and then everything is OK again. Here is the RAM:…
mle95
  • 1
  • 2