Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hp-procurve]

ProCurve was the trade name of network products developed by Hewlett-Packard from 1998 to 2010. Since 2010 the brand name changed to HP Networking Products but users still recognize them as ProCurve.

146 questions
3
votes
1 answer

vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service…
user62491
3
votes
1 answer

ProCurve 2610 Java error?

I've got two identical procurve 2610-24/12PWR switches with the web interface configured. I can log in to one and see all the management info just fine. When I load the web interface of the other I'm asked to authenticate as usual and the various…
Josh
  • 245
  • 1
  • 3
  • 10
3
votes
2 answers

HP Procurve 1800 Switch-to-Switch Trunks and LACP (and VLANs too!)

I am considering connecting two (and possibly three) HP Procurve 1800 switches together with trunks or with LACP. I can't find any substantial answer to my questions via Google or here. I did find this question Server-to-Switch Trunking in Procurve…
Mei
  • 4,590
  • 8
  • 45
  • 53
2
votes
1 answer

ProCurve 2910al-48G-PoE+ (J9148A) configuration

I'm (re-)configuring a ProCurve 2910al-48G-PoE+ (J9148A). Although I thought I had a reasonable understanding of routing etc, I've never done this with enterprise hardware. I can't seem to make the switch work the way I want. Here's the…
Ghost
  • 121
  • 3
2
votes
0 answers

NIC team not load balancing

I'm trying to achieve a load-balanced NIC team on a Windows Server 2016 machine. This is a ProLiant using a 4x 1Gb 311FLR interface card which as of yesterday has the latest driver installed (100.20.0.64). The NIC team has been created in Windows…
Rich M
  • 273
  • 2
  • 17
2
votes
3 answers

WAN access on Layer 3 Switch

I have an HP ProCurve 8212zl Switch which I am currently configuring from scratch. This switch is a Layer 3 switch, meaning it also supports routing. I also have an ISP that provides me with access to the Internet via a 1000SX gigabit SFP fibre…
Siler
  • 349
  • 1
  • 7
  • 14
2
votes
0 answers

Protecting network from a broadcast storm

We have a flat office network tree built on a number of different ProCurve L2 and L3 GigE switches that spans some 300 ports. Today I found that one of the devices in the network for a short period of time causes excessive broadcast that causes…
Dima Chubarov
  • 2,316
  • 1
  • 17
  • 28
2
votes
1 answer

Restarting HP 1810 without writable SNMP?

I have been tasked with finding a way to reboot all of my switches for a bunch of small satellite sites every night when everyone is gone. I have HP 1810-26G switches at most of the sites, which is fine and dandy when they work. We're needing to…
Scott
  • 23
  • 3
2
votes
2 answers

HP 2510G Loop Protect doesn't work

I have a problem with Loop-Protect on a HP 2510G Switch. I configured Loop-Protect with loop-protect all receiver-action send-disable and set transmit-interval 1 and disable-timer 30. I tested my setup: Client 1 at Port 1 ping Client 2 at Port 2.…
CookieCrash
  • 96
  • 1
  • 8
2
votes
2 answers

Cannot disable mac restriction on port for HP Procurve 2626

I have a HP Procurve 2626 as the main trunk for several subnets in production. I am a UNIX systems administrator and not a networking guy, but I've worked with cisco switches and some of these HP switches before. I am completely baffled by the fact…
user1625222
  • 21
  • 1
  • 3
2
votes
2 answers

Colocation, Full Rack, Layer2/Layer3 Clarification

We are moving from several 1U servers colo'ed out across several data centers to a full rack in a nearby data center for both physical access reasons, as well as having space for expansion. We also will probably sell off a bit of colo space here…
CrainBramp
  • 51
  • 4
2
votes
1 answer

switch, procuve 2510, error: OS TFTP in prgrs, SNMP denied

I cannot reboot 2510-24 then I get this message: OS TFTP in prgrs, SNMP denied Smart as I am I just started a new TFTP download of latest firmware, but that is a no-go since another download is in progress... well, there is not. But the switch say…
Tillebeck
  • 511
  • 1
  • 4
  • 19
2
votes
1 answer

Spanning-tree setup with incompatible switches

I have a set of eight HP ProCurve 2910al-48G Ethernet switches at my datacenter that are set up in a star topology with no physical loops. I want to partially mesh the switches for redundancy and manage the loops with a spanning-tree…
wfaulk
  • 6,878
  • 7
  • 46
  • 75
2
votes
2 answers

VLAN Traffic changing source when captured at firewall

1) HP Switch config below 2) Fortinet Policy in attached image Right now, we are a flat network of roughly 320 wireless devices, and about 100 wired devices. We have a FortiGate 300C firewall with a single internet connection, and a single internal…
Brandon
  • 31
  • 4
2
votes
2 answers

Need help setting up an HP Procurve 2650 switch via serial using Linux.

I recently bought an HP Procurve 2650 (J4899A) off ebay and it came out without a serial cable. So I also purchased a null modem serial cable (rs232) to connect to it (Assuming this is the right one). I have plugged it into a box running debian and…
user168209
  • 23
  • 1
  • 1
  • 3
1 2 3
…
9 10