Questions tagged [lte]

LTE (telecommunication) - Long Term Evolution

LTE is a standard for wireless communication of high-speed data for mobile phones and data terminals. The standard is developed by the 3GPP ( http://www.3gpp.org/LTE ).

LTE (Long Term Evolution) or the E-UTRAN (Evolved Universal Terrestrial Access Network), introduced in 3GPP R8, is the access part of the Evolved Packet System (EPS). The main requirements for the new access network are high spectral efficiency, high peak data rates, short round trip time as well as flexibility in frequency and bandwidth.

The LTE access network is simply a network of base stations, evolved NodeB (eNB), generating a flat architecture (figure 2). There is no centralized intelligent controller, and the eNBs are normally inter-connected viathe X2-interface and towards the core network by the S1-interface (figure 2). The reason for distributing the intelligence amongst the base-stations in LTE is to speed up the connection set-up and reduce the time required for a handover. For an end-user the connection set-up time for a real time data session is in many cases crucial, especially in on-line gaming. The time for a handover is essential for real-time services where end-users tend to end calls if the handover takes too long.

To understand the PS(protocol stack) of LTE which tells about data & signaling messages flow between different entities of LTE network interface. For more details about each layers one can refer below 3GPP specs. LTE PS is divided mainly into two categories NAS and AS Layers.

  • NAS(Non-access stratum) Layer
  • AS(Access Stratum) Layer
    • RRC(Radio Resource Control) Layer. Refer 36.331
    • PDCP(Packet Data Convergence Protocol) Layer. Refer 36.323
    • RLC(Radio Link Control) Layer Refer 36.322
    • MAC(Medium Access Control) Layer. Refer 36.321
    • PHY(Physical) Layer. Refer 36.201
295 questions
5
votes
0 answers

Use AVD Manager UICC (SIM) Certificate to sign APK

My goal is to test VoLTE (voice-over-LTE) settings on Android 6.0, and to do so I have to use CarrierConfig & TelephonyManager APIs. These APIs requires Carrier authentication-level, it means : signing app with one of the certificate authorized…
Alex
  • 4,599
  • 4
  • 22
  • 42
4
votes
1 answer

How to configure a modem module with the information retrieved from the SIM card

I'm using a Telit LE910-C1 module to connect my ESP32 to internet through a SIM card. I don't know much about how modems work but I inherited a code which works correctly (establishing a connection). The problem is that it works only with the SIM it…
4
votes
2 answers

what is difference between TDF and PCEF?

In the PCC architecture there is is TDF and PCEF that they are same. What is difference between TDF and PCEF? HowTDF and PCEF work with together?
Tavakoli
  • 1,303
  • 3
  • 18
  • 36
4
votes
1 answer

Why HSS is used in LTE instead of HLR?

I have a query that why HLR is not used in LTE Network instead HSS is used. I know that HLR doesn't support diameter protocol but only SS7's MAP where as HSS supports diameter protocol. Is there any other reasons related to data type or…
user3514163
  • 41
  • 1
  • 1
  • 4
4
votes
1 answer

preferred_network_mode values for GWL/LTE ONLY/WCDMA ONLY/GSM using adb

I am using below adb commands for changing preferred network mode to GSM where value is 1, Can any one give the values for other modes like - GWL (GSM/WCDMA/LTEONLY) - LTE ONLY - WCDMA PREFERRED etc adb root adb wait-for-devices adb shell sqlite3…
Rohith Gowda
  • 137
  • 2
  • 2
  • 12
4
votes
3 answers

How LTE and UMTS transition away from full-power state?

I'm trying to understand how does LTE and UMTS/HSPA+ transition away from the full power state, and what kind of resources are tied up at the tower when the radios of the mobile device are operating at full power. I've looked at Ch. 7 and 8 of High…
cnst
  • 25,870
  • 6
  • 90
  • 122
4
votes
5 answers

LTE stack protocol development

While reading an article on LTE, I came across a term "LTE Stack Protocol Development". Sadly, there was no further explanation on the term and when I looked it up on google, it turned up all job openings in LTE protocol development. So here is the…
4
votes
1 answer

How does one programmatically start a hidden app on iOS / iPad?

How can I run a "hidden" app on a non-jailbroken device? FieldTest app is a hidden app on ios devices, and can be started by typing a series of keys on the iPhone phone app keypad. I would like to run FieldTest on iPad, but iPad doesn't have a…
3
votes
1 answer

Programmatically Check LTE capability on Android Device

I want to check if the device my apk is running on has LTE capability. Now, I have tried http://developer.android.com/reference/android/telephony/TelephonyManager.html but this only gives me information about current network type(GPRS/LTE). But i…
Ankur Aggarwal
  • 2,210
  • 2
  • 34
  • 39
3
votes
1 answer

How to use symlinked cdc-wdm device with ModemManager?

We have created udev rules to make the device naming consistent for the cdc-wdm devices, no matter in what order our lte usb devices are registered at the usb bus. We had the issue that we could not rename the cdc-wdm devices, which I understand is…
Florian Berndl
  • 1,136
  • 8
  • 27
3
votes
0 answers

Use LTE laptop for cellular phone calls

I want to use my laptop with LTE modem (and SIM card slot) for regular calls, using the phone number associated with my SIM. From my current operator, and also some forums, I got an answer that it is not possible. Why? I still would like to know a…
Jakub M.
  • 321
  • 2
  • 7
3
votes
1 answer

Tp-Link M7350 4G LTE Router - Send SMS using python script with a Raspberry Pi

Raspberry Pi 4B 4GB with Pi Os. TP-Link M7350 4G LTE Router. After long time searching the internet for a guide how to send SMS using python script and M7350, i only found for model MR-6400. The router emulator page is the following: Router…
PeterPan2020
  • 174
  • 1
  • 12
3
votes
1 answer

What is the normal behavior of '+CEREG' unsolicited messages?

My server is receiving data from a Telit ME910C1 LTE Cat-M modem. The unit is placed on a vehicle in movement. Sometimes the responses are received late, and when it does get the response on time, the cell-id changes. Please help me narrow down this…
omar elha
  • 31
  • 4
3
votes
2 answers

What is the difference between a smartcard and SIM card?

I'm aware that a SIM card is electrically just a smart card but to focus my question more, can I use any smartcard with contacts that I've cut down to size as a SIM card if programmed correctly. Is software the only thing that makes a SIM card a…
Ryan Malley
  • 43
  • 1
  • 5
3
votes
2 answers

2G / 3G / 4G Network forcing

I'm busy writing some code to get signal strength and stuff but would like to programatically "force" my network connection to 2G / 3G / 4G so that for more conclusive measurements. I know there's a lot of applications capable of: forcing…
Paul
  • 756
  • 1
  • 8
  • 22
1
2
3
19 20