Questions tagged [lte]

LTE (telecommunication) - Long Term Evolution

LTE is a standard for wireless communication of high-speed data for mobile phones and data terminals. The standard is developed by the 3GPP ( http://www.3gpp.org/LTE ).

LTE (Long Term Evolution) or the E-UTRAN (Evolved Universal Terrestrial Access Network), introduced in 3GPP R8, is the access part of the Evolved Packet System (EPS). The main requirements for the new access network are high spectral efficiency, high peak data rates, short round trip time as well as flexibility in frequency and bandwidth.

The LTE access network is simply a network of base stations, evolved NodeB (eNB), generating a flat architecture (figure 2). There is no centralized intelligent controller, and the eNBs are normally inter-connected viathe X2-interface and towards the core network by the S1-interface (figure 2). The reason for distributing the intelligence amongst the base-stations in LTE is to speed up the connection set-up and reduce the time required for a handover. For an end-user the connection set-up time for a real time data session is in many cases crucial, especially in on-line gaming. The time for a handover is essential for real-time services where end-users tend to end calls if the handover takes too long.

To understand the PS(protocol stack) of LTE which tells about data & signaling messages flow between different entities of LTE network interface. For more details about each layers one can refer below 3GPP specs. LTE PS is divided mainly into two categories NAS and AS Layers.

  • NAS(Non-access stratum) Layer
  • AS(Access Stratum) Layer
    • RRC(Radio Resource Control) Layer. Refer 36.331
    • PDCP(Packet Data Convergence Protocol) Layer. Refer 36.323
    • RLC(Radio Link Control) Layer Refer 36.322
    • MAC(Medium Access Control) Layer. Refer 36.321
    • PHY(Physical) Layer. Refer 36.201
295 questions
0
votes
2 answers

What does the getDeviceId() method of the Android TelephonyManager return for a CDMA phone with LTE?

The definition of the method on developer.android.com simply says that the method returns the "unique device ID, for example, the IMEI for GSM and the MEID or ESN for CDMA phones." So, for a CDMA phone with LTE, e.g. an LTE phone on Verizon, which…
bureau13
  • 31
  • 4
0
votes
1 answer

Cannot immediately connect to the server when android device is on sleep even though my app gets the PARTIAL_WAKE_LOCK at PowerManager (Sony Xperia)

[Abstract of my android app] My app monitors the server at fixed intervals (30 seconds). [Results(Issue)] 18[h] 00[m] 00[s] server check ok. 18[h] 00[m] 30[s] server check ok. 18[h] 03[m] 14[s] server check ok. <= This is issue. My app should…
0
votes
1 answer

SMS text message from send-mail.php to 4G percent sign changes to upside down question mark

When I send an SMS text message from send-mail.php to a 4G phone the percent sign changes to an upside down question mark. It works fine sending to a 3G phone. The message is about probability of rainfall, for example "10% chance of rain".
user1892770
  • 323
  • 2
  • 3
  • 15
0
votes
2 answers

Android API for Setting QCI value to make a VoLTE Call in Android phones

To make a VoLTE call in Android phones we have to Set QCI value as 1 (related to LTE). Are there any APIs provided by Android Application frameworks to set this QCI value ?? I found few APIs in Android Telephony Manager, but using this i am able to…
0
votes
1 answer

Get CellID,LAC,PCI,RSRP,RSRQ,SINR From iPhone 5s Qualcomm MDM9615M Baseband Chip

How can I Get CellID,LAC,PCI,RSRP,RSRQ,SINR From iPhone 5s Qualcomm MDM9615M Baseband Chip? I need more details from Qualcomm MDM9615M Baseband Chip. Such as: MCC, MNC, SectorLat, SectorLong, CellId, LAC, UARFCN, RxLev, TimingAdvance, BandInfo,…
user3471477
  • 11
  • 1
  • 3
0
votes
3 answers

How to know a received packet is a TM, UM or AM RLC packet?

I'm writing a dissector in wireshark for parse received packets. As we know there three types of RLC packet, that are TM, UM and AM RLC PDU. But how could I know the type of received packet?
Kery
  • 513
  • 8
  • 22
0
votes
1 answer

Get LTE parameters of signal strength

I am developing an application to get some LTE parameters like RSSI,RSRQ,RSRP, CQI. I know the classes(API 17 or higher) that I have to use, but I dont how to use it. If someone can show me a complete example I'll be very grateful to him. I need…
user3305388
  • 1
  • 1
  • 1
0
votes
1 answer

How get LTE cell info on android API 16 and lower?

I need get cell id, lac (or respectives) to LTE cell. I know that is easy on API version 17 and higher, but I really need get this on the older versions. So, someone could help me? Thanks in advance!
williamlopes
  • 406
  • 6
  • 16
0
votes
4 answers

protocols in long term evolution(LTE). 4G

4G-Lte consists of different layers protocol stack. I have Understand the graph of that stack. One thing i didn't get, are they are protocols or just a layers.If they are protocols, Can i get open Source code for each protocols in C.
rock_buddy
  • 265
  • 1
  • 6
  • 14
0
votes
1 answer

How to Get Total Number of Operator Used?

I need to model the latency with several system configuration (single core, multi core, multi node on same server, multi servers) of an LTE simulator. Does anyone have any idea how to calculate the computation amount of a source code (or a part of…
Ankur Gautam
  • 1,412
  • 5
  • 15
  • 27
0
votes
1 answer

Using IPs to connect phones

I have been messing around with Asterisk for a few days, I am enjoying it, but I recently just thought of a potentially simpler way to achieve what I want, but I don't really know if it's possible. Is it possible to match two smartphones over LTE…
Nolan Anderson
  • 576
  • 1
  • 6
  • 15
0
votes
1 answer

What stops Windows from having an open IP connection when an LTE modem is plugged in?

When you plug in an LTE modem, as part of the attach process to the LTE network, it sets up a default EPS bearer to carry signalling traffic. This default bearer is an IP connection with a Traffic Flow Template suitable for signalling traffic. The…
-1
votes
1 answer

Can PDN Connectivity Request for IMS APN be initiated if VoPS support is not there in Attach Accept?

I have a scenario where UE requests for the VoPS service in the Attach Request, but the network is sending eps_netwk_feature_support_incl as 0, which as per my knowledge signifies that the voice service over PS is not supported. Further, I can see…
Nikhil Shaw
  • 334
  • 2
  • 7
-1
votes
1 answer

Bitmasking and Air724 LTE Module

Looking for a bit (pardon the pun) of help on this one. I need to set the various band parameters on an Air724 modem as in the descriptor below for the AT*BAND= syntax. I am in Australia and looking to use the Telstra FDD-LTE Band 3 only. I am…
-1
votes
1 answer

How EnB will inform to UE about incoming call in RRC connected state in LTE?

Generally if UE is in RRC Idle state, ENB will inform to UE via paging message about CS domain i.e incoming call. My doubt is in LTE, when UE is in RRC Connected State, how network will notify to UE about incoming MT call ? In which Information…
Achal
  • 11,821
  • 2
  • 15
  • 37
1 2 3
19
20