I have host computer (Windows 10) with 1 ethernet port, it's connected by ethernet cable to corporative network with fixed ip address: 10.0.160.189
I have also microcomputer (CentOS 7 - console without gui) with 3 ethernet ports, it's connected by ethernet cable with usb-adapter to host computer
In this way, in windows network settings I have 2 interfaces: corporative interface 'Ethernet 1' (public + domain) and interface of usb-adapter netcard 'Ethernet 2' (public + unnamed)
I tried to share network from interface 1 to interface 2, and interface 2 was automatically assigned this ip address: 192.168.137.1 - and microcomputer was assigned this ip address: 192.168.137.211
In this way, now both computers can ping each other within ip range 192.168.137.0/24, but cannot ping anything else, even 8.8.8.8 ('time is up' error)
So, what could be the problem? How can I get network access in microcomputer via host?
I could directly connect corporative cable to microcomputer, and it worked, but I run specific webserver on it that can be viewed only on host browser, unfortunately
P.S. I work with microcomputer by console cable in PuTTY
Ssh-connection between these computers also isn't available
Surprisingly, host still can access websites in browser, but not ping it, and additionally, I have vm (Vbox Ubuntu) on host, that can ping host while host can't ping it
All host accesses became stable right after disabling network sharing as expected
I heard that I supposedly should use network switch instead of usb-adapter for host, but I'm not sure about that, I need to buy it after all...
