As I am using iMX series board, for that I am using Yocto 4.0 as source. I wanted to port container-image from https://github.com/savoirfairelinux/meta-embedded-containers to my build setup containing 4.0. While building bitbake embedded-container-image I am facing below issue,
WARNING: mount-noauto-1.0-r0 do_package_qa: QA Issue: mount-noauto: recipe doesn't inherit features_check [unhandled-features-check]
ERROR: container-image-1.0-r0 do_pull_image: Error launching docker daemon
ERROR: container-image-1.0-r0 do_pull_image: ExecutionError('/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/temp/run.do_pull_image.18009', 1, None, None)
ERROR: Logfile of failure stored in: /yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/temp/log.do_pull_image.18009
ERROR: Task (/yocto-bsp/sources/meta-embedded-containers/recipes-support/container-image/container-image.bb:do_pull_image) failed with exit code '1'
ERROR: kernel-module-nxp89xx-1.0-r0 do_compile: oe_runmake failed
ERROR: kernel-module-nxp89xx-1.0-r0 do_compile: ExecutionError('/yocto-bsp/build/tmp/work/imx6ull-poky-linux-gnueabi/kernel-module-nxp89xx/1.0-r0/temp/run.do_compile.18002', 1, None, None)
ERROR: Logfile of failure stored in: /yocto-bsp/build/tmp/work/imx6ull-poky-linux-gnueabi/kernel-module-nxp89xx/1.0-r0/temp/log.do_compile.18002
In log file, /yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/temp/log.do_pull_image.18009
DEBUG: Executing shell function do_pull_image
/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/temp/run.do_pull_image.18009: 147: /yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/temp/run.do_pull_image.18009: pidof: not found
sudo: /yocto-bsp/build/tmp/hosttools/sudo must be owned by uid 0 and have the setuid bit set
ERROR: Error launching docker daemon
WARNING: exit code 1 from a shell command.
This sudo error due to sudo command in do_pull_image(), i.e.,
# line: 29, file: /yocto-bsp/sources/meta-embedded-containers/recipes-support/container-image/container-image.bb
do_pull_image() {
[ -f "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/images.manifest" ] || bbfatal "images.manifest does not exist"
[ -n "$(pidof dockerd)" ] && sudo kill "$(pidof dockerd)" && sleep 5
[ -d "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/docker-store" ] && sudo rm -rf "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/docker-store"/*
# Start the dockerd daemon with the driver vfs in order to store the
# container layers into vfs layers. The default storage is overlay
# but it will not work on the target system as /var/lib/docker is
# mounted as an overlay and overlay storage driver is not compatible
# with overlayfs.
sudo /usr/bin/dockerd --storage-driver vfs --data-root "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/docker-store" &
# Wait a little before pulling to let the daemon be ready.
sleep 5
if ! sudo docker info; then
bbfatal "Error launching docker daemon"
fi
local name version tag
while read -r name version tag _; do
if ! sudo docker pull "${name}:${version}"; then
bbfatal "Error pulling ${name}"
fi
done < "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/images.manifest"
sudo chown -R "aysha" "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/docker-store"
# Clean temporary folders in the docker store.
rm -rf "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/docker-store/runtimes"
rm -rf "/yocto-bsp/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/container-image/1.0-r0/docker-store/tmp"
# Kill dockerd daemon after use.
sudo kill "$(pidof dockerd)"
}
For these I had tried
- Changing the ownership and permission of /yocto-bsp/build/tmp/hosttools/sudo. And this is symbolic link to /usr/bin/sudo.
- Tried using fakeroot
- Manually changed /yocto-bsp/build/tmp/hosttools/sudo to /usr/bin/sudo in bb file.
- Tried clean and rebuild of receipe. By doing all these still the issue exists.
Please let me know what changes to be performed to execute this sudo as a part of yocto build. Waiting for your reply.
