*Note: I figured out why the image was too dark at max SENSOR_SENSITIVITY: it was just a matter of EXPOSURE_TIME being too short, had to pump it up to 8 digits. Now all I have to do is save the values for SENSOR_SENSITIVITY and EXPOSURE_TIME. So, this question is answered, unless there's a better way?
Using Camera X (Camera2Interop) I want to turn off auto-exposure and white balance. Because I want to manually adjust the brightness, and ideally have it locked at that value until I adjust it again.
I'm not capturing an image but just working with the preview, and image analysis.
When turning CONTROL_MODE off or AE off the preview & analysis are black (unless pointed directly at light bulb), and I can get an image by adjusting SENSOR_SENSITIVITY, but the image is still too dark at maximum and has noise in it. When I modify EXPOSURE_TIME the image goes 100% black no matter what.*
Using AE_LOCK + AE_EXPOSURE_COMPENSATION instead fixes the issue of the black preview and prevents auto-correction, but isn't consistent, for I don't have a way to reset the brightness to what was set previously. For example: if I open the main camera app and go back to mine the brightness is now locked at a different value.
Camera2Interop.Extender extender = new Camera2Interop.Extender(builder);
//extender.setCaptureRequestOption(CaptureRequest.CONTROL_AF_MODE, CameraMetadata.CONTROL_AF_MODE_OFF);
//extender.setCaptureRequestOption(CaptureRequest.CONTROL_AE_EXPOSURE_COMPENSATION,-1);
extender.setCaptureRequestOption(CaptureRequest.CONTROL_AF_MODE, CameraMetadata.CONTROL_AF_MODE_MACRO);
//extender.setCaptureRequestOption(CaptureRequest.SENSOR_EXPOSURE_TIME,10);
//extender.setCaptureRequestOption(CaptureRequest.CONTROL_MODE, CaptureRequest.CONTROL_MODE_OFF);
//extender.setCaptureRequestOption(CaptureRequest.CONTROL_AE_MODE, CaptureRequest.CONTROL_AE_MODE_OFF);
extender.setCaptureRequestOption(CaptureRequest.CONTROL_AWB_MODE, CaptureRequest.CONTROL_AWB_MODE_OFF);
//extender.setCaptureRequestOption(CaptureRequest.SENSOR_SENSITIVITY,99999);
extender.setCaptureRequestOption(CaptureRequest.CONTROL_AWB_LOCK,true);
extender.setCaptureRequestOption(CaptureRequest.CONTROL_AE_LOCK,true);
//extender.setCaptureRequestOption(CaptureRequest.BLACK_LEVEL_LOCK,true);
Another issue is When adjusting brightness via EXPOSURE_COMPENSATION it seems to compound. For example, if it's set to -3 the image gets a little darker with every start of the application, or probably every time startCameraX is run. Perhaps this is an easy fix by moving it out of startcamera, but I was attempting to start or reset to it's previously set value.
ExposureState exposureState = camera.getCameraInfo().getExposureState();
if (!exposureState.isExposureCompensationSupported()) return;
Range<Integer> range = exposureState.getExposureCompensationRange();
int index = exposureState.getExposureCompensationIndex();
if (range.contains(1) && index != -3) {
camera.getCameraControl().setExposureCompensationIndex(-3);
}
Also, all the warning that come along with the camera2 interop extender makes it seem odd that's the official solution.
Other failed attempts: Canceling focus and metering, and set the metering point to 0x0 pixels.
camera.getCameraControl().cancelFocusAndMetering();//.setExposureCompensationIndex(12);
MeteringPointFactory meteringPointFactory = previewView.getMeteringPointFactory();
MeteringPoint meteringPoint = meteringPointFactory.createPoint(0,0, 0);
FocusMeteringAction action = new FocusMeteringAction.Builder(meteringPoint).build();
//.setAutoCancelDuration(1, TimeUnit.MICROSECONDS).build();
cameraControl.startFocusAndMetering(action);
