I currently have a dataset. I wanted to get your opinion on this. The data is as follows: there is a production line. A longitudinal plate as wide as the hand is produced. I am sending the photo. 10 cm wide. 5mm thick. Deformations are seen at some points of this produced plate. There is also a system that detects deformations. In other words, while the production continues, the length gradually increases and deformations, if any, are detected. For example, at the 70th meter, at the 380th meter and at the 1200th meter … the deformations started to increase. We are trying to find out in which meters of the plate these deformations increase. As a result, we have two data that changes with time (data is taken every 5 seconds). One is the ever-increasing length data and the other is whether it is deformed corresponding to the length. Meanwhile, the line moves very slowly. What kind of way should be followed to find out in which meters of the plate these deformations increase? What kind of tests (cointegration etc.) should be applied? If you have any suggestions, I'll be glad to wait.plate
What kind of tests (cointegration etc.) should be applied?
