I have a M6E Nano connected with a Serial Basic USB breakout board. Connecting everything together and using the Universal Reader Assistant works, but when I start reading tags nothing shows and the board disconnects after a few seconds.
Asked
Active
Viewed 23 times
1 Answers
0
Because the board is not getting enough power it will brown out. Resetting the board.
Make sure the USB breakout board is supplying 5V of power instead of the default 3.3V.
On the back of the board is a 3 pad jumper that you need to sever and re-solder to 5V.
Maarten
- 402
- 5
- 20