Cannot boot system on real hardware in COSMOS

Question

I have recently made a C# Cosmos system. It is very simple, with a few commands. I can run this on VMware without any problems, but when I flash the ISO onto a USB stick with RUFUS and then boot it from my HP-Pavillion-360-Convertable with 4GB of RAM, this is the error I get:

The Error

Edit(Suggested by Dijkgraaf):

Here is the error in text:

Finding PCI Devicesd
Starting ACPI
Searching Ethernet Controllers...
Found Unknown device on PCI 2:0:0
No supported network card found!!
Exception occurred while running kernel:
Exception: No disks found!

Is there any way I can fix this? If so, how?

Please [edit] the question and post the error message as text. — Dijkgraaf, Jun 01 '22 at 23:04
Perhaps you should ask on their discord or github discussions page https://www.gocosmos.org/? — Jeremy Lakeman, Jun 02 '22 at 05:44
how do you make your OS bootable with rufus? because when I trying to make my OS bootable with rufus, I've got an error says "non-bootable image is not supported by rufus" — Noryn Basaya, Nov 28 '22 at 16:25

score 1 · Accepted Answer · answered Jun 03 '22 at 19:32

1

Turns out that VFS sucks and will not work on modern disks like SATA, etc... it only works on IDE. So, I removed VFS and it booted with RUFUS with a FAT32 filesystem.

Thanks to the discord server for helping me out!

answered Jun 03 '22 at 19:32

RZ4

31
5

If your problem is solved then please mark the answer as accepted. – RBT Jun 03 '22 at 22:30
@RBT There is a 48 hour delay before you can accept your own answer, see https://stackoverflow.com/help/self-answer – Progman Jun 04 '22 at 08:45

Cannot boot system on real hardware in COSMOS

1 Answers1