0

I'm trying to run Speedtest CLI on an embedded Linux device using LTE in the US but the upload fails:

Speedtest by Ookla

     Server: North Central Telephone Coop - Lafayette, TN (id = 4895)
        ISP: Verizon Wireless
    Latency:    49.88 ms   (6.93 ms jitter)
   Download:     9.23 Mbps (data used: 9.8 MB )                               
     Upload: FAILED                                            
[error] Cannot write:

This works fine if I put the same SIM card in a Wifi access point then connect to it, so it's something to do with the setup of the device. But it works fine in other countries with local carriers.

parsley72
  • 8,449
  • 8
  • 65
  • 98
  • To the person who voted to close - it's taken me several weeks to find the solution to this problem so I'm sharing the knowledge. – parsley72 Mar 22 '22 at 04:49

1 Answers1

0

Turns out the problem is that Linux defaults the MTU to 1500 but US mobile carriers prefer a lower value: https://www.digi.com/support/knowledge-base/recommended-mtu-mru-settings-on-cellular-networks

Recommended values are:
* AT&T 1420 bytes
* Verizon 1428 bytes
* Others 1430 bytes
(PPP interface default is 1500 bytes)

To ensure our routers work well on all carriers. set the PPP interface local and remote MRU to 1420.

Changing the MTU to 1420 fixed the problem:

ifconfig <Interface_name> mtu <mtu_size> up

Full instructions here: https://linuxhint.com/how-to-change-mtu-size-in-linux/

parsley72
  • 8,449
  • 8
  • 65
  • 98