Generation model using Forge (Design Automation) makes elements invisible

Question

I have some troubles after Forge model generation. The main goal is to get rvt model from JSON. I have tested my code with Revit API in Revit. It works nice. But when add bundle to the Forge app and got rvt result - I have faced with weird glitch. I can`t see any wall in the project, but walls exist. I have checked with lookupRevit and saw walls and ids. The question is "How to make invisible walls be visible?" I have attached the recording demonstrating my glitch. https://www.youtube.com/watch?v=WiZC2VLcVSc

Thanks

Thank you for escalating this issue here from the original thread in the Revit API discussion forum on [Generation model using Forge (Design Automation) makes elements invisible](https://forums.autodesk.com/t5/revit-api-forum/generation-model-using-forge-design-automation-makes-elements/m-p/10179538)! — Jeremy Tammik, Mar 25 '21 at 11:59

score 1 · Answer 1 · edited Mar 25 '21 at 12:11

1

Please share the code for a minimal reproducible case so we can take a look. I am not aware of any way to achieve this result just creating a wall and saving the BIM. So, it will be interesting to see how you succeed with this feat.

Correction: a colleague spotted the problem in your video:

It looks like the walls were created in Phase 3, and the view phase is 1.

Copy-pasting them puts them on the active phase thus making them visible. (At least best I can tell from the video!)

edited Mar 25 '21 at 12:11

Rahul Bhobe

4,165
4
17
32

answered Mar 25 '21 at 11:57

Jeremy Tammik

7,333
2
12
17

Thanks. You solved it. Problem was in phase, but this is weird why third phase was used. I will check it. Thanks again! – илья иванов Mar 26 '21 at 12:03

Generation model using Forge (Design Automation) makes elements invisible

1 Answers1