Vertical Alignment of text in a table in Latex (Overleaf)

Question

I have the following sample code in overleaf to generate a table.

\documentclass[hidelinks,a4paper,12pt,oneside]{article}
\usepackage[utf8]{inputenc}
\usepackage[margin=1in]{geometry}
\usepackage{multicol}
\usepackage{multirow}
\usepackage{array}
    \newcolumntype{P}[1]{>{\centering\arraybackslash}p{#1}}
    \newcolumntype{M}[1]{>{\centering\arraybackslash}m{#1}}

\usepackage{stackengine}
    \newcommand\xrowht[2][0]{\addstackgap[0.5\dimexpr#2\relax]{\vphantom{#1}}}
    
\title{table}
\begin{document} 
\maketitle


\begin{table}[ht]
\footnotesize
    \centering
    \begin{tabular}{|P{0.75cm}|P{1.25cm}|P{0.75cm}|P{0.75cm}|P{0.75cm}|P{0.75cm}|P{0.75cm}|P{1cm}|P{1cm}|P{1cm}|P{1cm}|P{0.75cm}|}
    \hline\xrowht[()]{15pt}
         \multirow{2}{*}{Test} & \multirow{2}{*}{Name} & \multicolumn{3}{c|}{Domain} & \multirow{2}{*}{Cell} & \multicolumn{4}{c|}{MLR} & \multirow{2}{*}{$C_1$} & \multirow{2}{*}{$C_2$}\\
         \cline{3-5}\cline{7-10}\xrowht[()]{15pt}
         No & & x & y & z & Size & $\dot{m_t}$ & $\dot{m}_{in}$ & $\dot{m}_{out}$ & $\dot{m}_{avg}$ & & \\
         \hline\xrowht[()]{15pt}
         1 & Mass1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 \\
         \hline\xrowht[()]{15pt}
         2 & Mass2 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & \multicolumn{2}{c|}{0.1}  & 0.1 & 0.1 & 0.1 \\
         \hline
         \end{tabular}
         \vspace{0.5cm}
    \caption{Tests}
\end{table}


\end{document}

This gives me,

Problem: I cannot get the vertical alignement of the texts inside the table to center or any other position for that matter. For example, the texts "Test No", "Name", "Cell Size", "C1" and "C2", are supposed to be vertically center aligned. Further I see that using \hline\xrowht[()]{15pt} gives me different box width ,see "Domain" and "MLR" boxes. Can anybody please help me setup this table in a proper way?

Thanks everyone

samcarter_is_at_topanswers.xyz · Accepted Answer · 2020-08-11T19:50:49.247

Instead of manually messing with the row height of your table, you could change the \arraystretch and all your cells will automatically be centred

Some other points:

instead of manually adding space above the caption, have a look at the caption package
please have a look at http://betterposters.blogspot.com/2012/08/the-data-prison.html or https://www.inf.ethz.ch/personal/markusp/teaching/guides/guide-tables.pdf for some guides about nice table layouts. Putting your data into prison is definitely not a nice design
don't put multi-letter expressions like avg or out in math mode. This will completely mess up the kerning

\documentclass[hidelinks,a4paper,12pt,oneside]{article}
\usepackage[utf8]{inputenc}
\usepackage[margin=1in]{geometry}
\usepackage{multicol}
\usepackage{multirow}
\usepackage{array}
    \newcolumntype{P}[1]{>{\centering\arraybackslash}p{#1}}
    \newcolumntype{M}[1]{>{\centering\arraybackslash}m{#1}}

\usepackage{caption}
    
\title{table}
\begin{document} 
\maketitle



\begin{table}[ht]
\renewcommand{\arraystretch}{2}
\footnotesize
    \centering
    \begin{tabular}{|P{0.75cm}|P{1.25cm}|P{0.75cm}|P{0.75cm}|P{0.75cm}|P{0.75cm}|P{0.75cm}|P{1cm}|P{1cm}|P{1cm}|P{1cm}|P{0.75cm}|}
    \hline
         \multirow{2}{0.75cm}{\centering Test\\ No} & \multirow{2}{*}{Name} & \multicolumn{3}{c|}{Domain} & \multirow{2}{0.75cm}{\centering Cell\\ Size} & \multicolumn{4}{c|}{MLR} & \multirow{2}{*}{$C_1$} & \multirow{2}{*}{$C_2$}\\
         \cline{3-5}\cline{7-10}
          & & x & y & z & & $\dot{m_t}$ & $\dot{m}_{in}$ & $\dot{m}_{out}$ & $\dot{m}_{avg}$ & & \\
         \hline
         1 & Mass1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 \\
         \hline
         2 & Mass2 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & \multicolumn{2}{c|}{0.1}  & 0.1 & 0.1 & 0.1 \\
         \hline
         \end{tabular}
%         \vspace{0.5cm}
    \caption{Tests}
\end{table}


\end{document}

If I look closely, the cells content is not exactly vertically centered (visible in rows 1 and 2), this is an issue with `\arraystretch` :-( worth a mention: https://tex.stackexchange.com/a/166370/32813 — escalator, May 20 '21 at 14:31

score 1 · Answer 2 · answered Feb 10 '23 at 11:36

With the tabularray package it is now much easier to merge cells and have them centred automatically:

\documentclass[hidelinks,a4paper,12pt,oneside]{article}
\usepackage[margin=1in]{geometry}
\usepackage{caption}
\usepackage{tabularray}
\title{table}
\begin{document} 
\maketitle

\begin{table}[ht]
\footnotesize
    \begin{tblr}{
      colspec = {*{12}{X}},
      cells={halign=c},
      vlines,
      hlines,
      stretch=2
    }
    \SetCell[r=2]{} Test No & \SetCell[r=2]{} Name & \SetCell[c=3]{} Domain && & \SetCell[r=2]{} Cell Size & \SetCell[c=4]{} MLR &&&& \SetCell[r=2]{} $C_1$ & \SetCell[r=2]{} $C_2$\\
    & & x & y & z & & $\dot{m_t}$ & $\dot{m}_{in}$ & $\dot{m}_{out}$ & $\dot{m}_{avg}$ & & \\
    1 & Mass1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 \\
    2 & Mass2 & 0.1 & 0.1 & 0.1 & 0.1 & 0.1 & \SetCell[c=2]{} 0.1 &  & 0.1 & 0.1 & 0.1 \\
    \end{tblr}
    \caption{Tests}
\end{table}

\end{document}

Vertical Alignment of text in a table in Latex (Overleaf)

2 Answers2