I have to complete a part of a virtual network assignment. The tasks sounds like "The VLan1 of the Sw3 should be assigned the second possible address of the subnet and fa0/1 of the R2 should be assigned the first possible address"
The fa0/1 interface address was assigned successfully. The problem is Sw3 is recognized as Router so I am not sure how I should configure vlans, I think it should be something with the encapsulation dot1q
If I try to assign the same ip for the e0/0.1 and e0/1.1 interfaces of the Sw3 I get the exception about overlapping ip's.
The subnet is 172.16.3.0/24 and I should be able to ping the Linux server with the ip 172.16.3.254 from both Sw3 and R2
Boot image for the Sw3 is l3-advipservices-m-15.4-2T.bin
