5

I am trying to test native iOS app using Appium v1.13.0.

When I execute the tests using iOS Simulator lunched by Xcode 10.2, I get the following error from the Appium server.

*********************************
*********************************
[XCUITest] Verifying application platform
[XCUITest] CFBundleSupportedPlatforms: ["iPhoneOS"]
[XCUITest] *********************************
[XCUITest] Simulator architecture appears to be unsupported by the '/var/folders/ld/f5b4gf396332hxdc9tw6kyrc0000gn/T/2019512-62665-1x5tail.vqbi/Payload/*****.app' application. Make sure the correct deployment target has been selected for its compilation in Xcode.
[XCUITest] Don't be surprised if the application fails to launch.
[XCUITest] *********************************
[XCUITest] Reset requested. Removing app with id 'com.*****.mp' from the device
[XCUITest] Installing '/var/folders/ld/f5b4gf396332hxdc9tw6kyrc0000gn/T/2019512-62665-1x5tail.vqbi/Payload/*****.app' on Simulator with UUID '204794D9-CA97-479C-B004-8DBC04942CF5'...
[XCUITest] The app has been installed successfully.
[BaseDriver] Event 'appInstalled' logged at 1560335980109 (13:39:40 GMT+0300 (EEST))
*********************************
*********************************
Qasim Maghaireh
  • 67
  • 1
  • 8

1 Answers1

7

It seems that your application has been built for iPhoneOS platform only, you will not be able to run it in the Simulator as the simulator assumes different architecture (x86) while real iOS devices run on ARM

You need to execute xcodebuild command and specify iOS Simulator platform as the output target like:

xcodebuild build -workspace "*****.xcworkspace" -scheme "*****" -destination "platform=iOS Simulator,name=iPhone SE" -configuration Release

If you don't have access to the application sources - unfortunately you will be only able to test it using real iOS devices, check out Appium XCUITest Driver Real Device Setup article for the required steps (by the way, the processes of generating/managing provisioning profiles and Simulators/devices are much easier with the Appium Studio)

Dmitri T
  • 159,985
  • 5
  • 83
  • 133
  • I got the following error when executing the command The following build commands failed: CompileSwift normal x86_64 CompileSwiftSources normal x86_64 com.apple.xcode.tools.swift.compiler (2 failures) – Qasim Maghaireh Jun 12 '19 at 12:02
  • Thank you. It works but how can I export IPA file not .app – Qasim Maghaireh Jun 12 '19 at 17:47