0

I have a problem with the Captive Portal.

My config.: Pentium 4, 512MB RAM.

WAN: 192.168.1.105 - This is my Internet. LAN: 10.10.10.1 - This lan connect to my router.

The problem is when I connect to the Router with two device and writing the username / password in Captive portal at PC1 and authenticated after PC2 not need to authenticate - I can use Internet connection too and others...

If I finished it ask aking all PC to login at CP.

I need a solution how to make to all PC need to login in Captive Portal and after use the Internet over Wifi.

Internet <- (WAN) pfSense (LAN) -> MyRouter(TP-LINK - Wireless) ((((wifi)))) PC1, PC2

Oussama Lemghari
  • 1
  • 3

1 Answers1

0

I recommend registering all PC MAC addresses to pfSense then enabling the Deny unknown clients and Static ARP options in the DHCP Server. Even if they get the password of your wifi, they will not be able to communicate with the router and will not be given an IP by the pfSense DHCP Server. Just be careful not to lock yourself out, register your computer/terminal and WIFI router first.

This is a more secure approach but tedious. On your WIFI router, you can do MAC Filtering, enable guest network or set a captive portal as your temporary control for guests where it is easier to change the WIFI password periodically.

Tonel Daclan
  • 59
  • 9