how to decode gps binary messages using gpsd in linux for u-blox neo8n gps engine

Question

is gpsd able to decode u-blox binary messages or not? i particularly need the UBX-NAV messages. if it doesn't what do you recommend to use instead?(a linux based one plz)

score 1 · Answer 1 · edited Dec 06 '20 at 13:05

1

sudo su
dmesg | grep tty. It's possible to see any below device name:
```
/dev/ttyUSB0
/dev/ttyACM0
/dev/ttyUSB1
/dev/ttyACM1
```
If device name contains "USB" try ln -s /dev/ttyUSB0 /dev/ttyACM1.

Note: Every disconnect port get changed Nameport!
Build some control files.
Open new terminal and enjoy: cgps.

edited Dec 06 '20 at 13:05

double-beep

5,031
17
33
41

answered Jan 20 '18 at 06:42

mohsen ramezani

11
2

how to decode gps binary messages using gpsd in linux for u-blox neo8n gps engine

1 Answers1