Please help, I simply can't get the simulator to run a static stress test. I get a solve failure error but no indication as to what is causing the failure. I have looked at several things but to no avail. Maybe someone else has ran into this before.
Asked
Active
Viewed 1,075 times
-4
-
I have taken some screen shots if that will help... https://drive.google.com/drive/folders/0B7xyBD0Aj42xRkhoR3pPTFlUb3c?usp=sharing – Jerrad Oct 18 '17 at 12:36
-
Here is the error/Result: 593 Tetrahedra : 100.0% of elements (100.0% of volume) Face Angle min: 21.2, max : 118 Dihedral Angle min: 7.18, max : 169 Worst shape ratio : 10.7 on element 78 Worst aspect ratio : 3.06 on element 277, Lowest collapse ratio : 0.151 on element 78 Worst Jacobian ratio : 1 on element 1 Base mesh: 1289 nodes, 593 elements Solver mesh: 1289 nodes, 593 elements Job has finished with errors. Receiving results. Error: Solver Error Error: An error occurred while solving the model. – Jerrad Oct 18 '17 at 12:37
-
Fusion 360 is CAD software, so I'm not sure how this is related to programming... – cocomac Nov 01 '22 at 17:55