Compute Module Starter Kit - Initial Boot Issue

Asked May 19 '17 at 05:18

Active May 19 '17 at 05:18

Viewed 160 times

I got my rapsberry pi compute module kit.

Unbox everything and inserted the Compute Module 3 on SO-DIMM connector of the IO Board.

J4 is set to EN J3 is set to 3V3 I am using Ubuntu 14.04 as host pc.

sudo apt-get install libusb-1.0-0-dev
git clone --depth=1 https://github.com/raspberrypi/usbboot
cd usbboot
make
./rpiboot -v

This is end up at Cannot open file fixup.dat

What could be the problem !! Please help me

asked May 19 '17 at 05:18

Kishore Chilakala

execute as sudo – eyllanesc May 19 '17 at 05:20
yes, I try it with sudo also but same result. – Kishore Chilakala May 19 '17 at 05:24
You could delete everything and run it back on the raspberry. – eyllanesc May 19 '17 at 05:29
Host need to be raspberry pi for this ? – Kishore Chilakala May 19 '17 at 05:55
If you are going to compile in a certain architecture it will be compatible for that architecture unless you implement a cross-compiler. – eyllanesc May 19 '17 at 05:57

0 Answers0