-1

I am trying to accomplish the following setup:

NVG599 <> ASUS RT-AC88U <> Static device

I have an Ubuntu Server running Apache which has been configured to use an internal address 192.x.x.x as well as one of the static IP addresses. I know Apache is running / listening / working. If I browse to the internal address I get the default Apache page. Ubuntu firewall is disabled. I actually have a domain setup that points to this IP address 'http://thelavender.net'

Normally the ATT RG would handle the second subnet / static IP block. What I cannot figure out is how the ASUS would handle these now that its basically taking over all routing duties.

There is a cascading router option in the ATT RG and I have seen some people talking about using this instead. Is this correct?

EDIT

Thinking back, I think 1:1 NAT is what I really need here correct?

EDIT 2
I tried using something along the lines of this: 

#!/bin/sh
#
# to restore this configuration, it needs to be saved to /jffs/scripts/nat-start
# on the router.
#
ifconfig eth0:0 WanIP1 netmask 255.255.255.248 up
iptables -t nat -A PREROUTING -i eth0 -d WanIP1 -j DNAT --to-destination     192.168.1.10
iptables -t nat -I POSTROUTING -s 192.168.1.10 -j SNAT --to WanIP1
#
ifconfig eth0:1 WanIP2 netmask 255.255.255.248 up
iptables -t nat -A PREROUTING -i eth0 -d WanIP2 -j DNAT --to-destination     192.168.1.11
iptables -t nat -I POSTROUTING -s 192.168.1.11 -j SNAT --to WanIP2
#
ifconfig eth0:2 WanIP3 netmask 255.255.255.248 up
iptables -t nat -A PREROUTING -i eth0 -d WanIP3 -j DNAT --to-destination 192.168.1.12
iptables -t nat -I POSTROUTING -s 192.168.1.12 -j SNAT --to WanIP3
#
# Port forwards, in case the webui doesn't work, but i think it will.  uncomment below if needed.
# iptables -A FORWARD -p tcp --dport 80 -d 192.168.1.10 -j ACCEPT

I only tried the first group and put this in the nat-start script for Merlin to pick up. When I did this and restarted the router, it refused to pick up the WAN IP from the RG.

Any help with this would be appreciated.

EDIT

Voted down but no explanation as to why.

Martin
  • 311
  • 1
  • 2
  • 20

1 Answers1

0

NVG599 LAN address: 192.168.0.254 / 255.255.255.0

RT-AC88U WAN address: 192.168.0.1 / 255.255.255.0 RT-AC88U LAN address: 192.168.1.1 / 255.255.255.0

NVG599 Cascaded Router: Enabled Cascaded Router Address: 192.168.0.1 Network Address: 107.218.164.224 Subnet Mask: 255.255.255.248

Server: 192.168.1.10 and 107.218.164.225

Startup script for the router: 

#!/bin/sh
#
# tell it where to find the server

ip ro add 107.218.164.225/32 via 192.168.1.10
iptables -I POSTROUTING -t nat -s 107.218.164.225/32 -j RETURN

#
# servers 2-N go here
......
#
# catch-all for everything else on the LAN
#
# this will double-NAT everything and will end up using the NVG's dynamic IP which is outside of the static IP block
##iptables -A POSTROUTING -t nat -o eth0 -j SNAT --to 192.168.0.1
#
# this uses one of the public IPs
iptables -A POSTROUTING -t nat -o eth0 -j SNAT --to 107.218.164.230

And script for the server if need be

#!/bin/sh
#
ifconfig eth0:1 107.218.164.225/29
ip ro repl default via 192.168.1.1 src 107.218.164.225
Martin
  • 311
  • 1
  • 2
  • 20