predecessors. I have a trouble in building RPM from my source code. It is written in Qt5 with Qt5.7.0. My system is Fedora 24. I installed qt-opensource-linux-x64-5.7.0.run and built my code successfully. But while building RPM, I have error in install stage.
My RPM file is as following.
Name: KPIViewer
Version: 1.0
Release: 1%{?dist}
Summary: KPIViewer
Group: Applications/Productivity
License: super2lao@gmail.com
#Source0: %{name}-%{version}-%(release).tar.gz
Source0: %{name}-%{version}.tar.gz
#BuildArch: i386
BuildRoot: %{_tmppath}/%{name}-root
Packager: PhonPanom Sivilay
Url: [http://www.kjbsoft.com]
Vendor: PhonPanom Sivilay
Requires: libtool
%define QT_LIB /opt/Qt5.7.0/5.7/gcc_64/lib/
%description
KPI Viewer
%prep
%setup -q -n %{name}-%{version}
%build
# % configure
qmake KPIViewer.pro
make %{?_smp_mflags} BINDIR=%{_bindir}
%install
mkdir -p $RPM_BUILD_ROOT/usr/{bin,share}
mkdir -p $RPM_BUILD_ROOT/usr/bin/%{name}
mkdir -p $RPM_BUILD_ROOT/usr/bin/%{name}/platforms
mkdir -p $RPM_BUILD_ROOT/usr/share/{applications,pixmaps}
mkdir -p $RPM_BUILD_ROOT%{QT_LIB}
install %{name} $RPM_BUILD_ROOT/usr/bin/%{name}
#install %{name}.sh $RPM_BUILD_ROOT/usr/bin/%{name}
#install %{QT_LIB}libQt5*.so.* $RPM_BUILD_ROOT/usr/bin/%{name}
#install %{QT_LIB}libicu*.so.* $RPM_BUILD_ROOT/usr/bin/%{name}
#install %{QT_LIB}libq* $RPM_BUILD_ROOT/usr/bin/%{name}/platforms
install %{QT_LIB}libQt5*.so.* $RPM_BUILD_ROOT%{QT_LIB}
install %{QT_LIB}libicu*.so.* $RPM_BUILD_ROOT%{QT_LIB}
install %{QT_LIB}libq* $RPM_BUILD_ROOT%{QT_LIB}
#install %{name}.desktop $RPM_BUILD_ROOT/usr/share/applications
#install %{name}.png $RPM_BUILD_ROOT/usr/share/pixmaps
%files
% defattr(-,root,root)
%{_bindir}/%{name}/%{name}
%{_bindir}/%{name}/%{name}.sh
%{_bindir}/%{name}/libicu*
%{_bindir}/%{name}/libQt5*
%{_bindir}/%{name}/platforms/libq*
%{_datadir}/applications/%{name}.desktop
%{_datadir}/pixmaps/%{name}.png
%clean
rm -rf $RPM_BUILD_ROOT
rm -rf $RPM_BUILD_DIR
%changelog
* Mon Aug 29 2016 super2lao
- Initial build
But in installation stage, I get the following errors.
extracting debug info from /home/makerpm/rpmbuild/BUILDROOT/KPIViewer-1.0-1.fc24.x86_64/usr/bin/KPIViewer/KPIViewer
extracting debug info from /home/makerpm/rpmbuild/BUILDROOT/KPIViewer-1.0-1.fc24.x86_64/opt/Qt5.7.0/5.7/gcc_64/lib/libicudata.so.56.1
xz: /tmp/tmp.JB9sU3EDbZ: No such file or directory
objcopy: cannot open: /tmp/tmp.JB9sU3EDbZ.xz: No such file or directory
extracting debug info from /home/makerpm/rpmbuild/BUILDROOT/KPIViewer-1.0-1.fc24.x86_64/opt/Qt5.7.0/5.7/gcc_64/lib/libicui18n.so.56
extracting debug info from /home/makerpm/rpmbuild/BUILDROOT/KPIViewer-1.0-1.fc24.x86_64/opt/Qt5.7.0/5.7/gcc_64/lib/libicudata.so.56
xz: /tmp/tmp.WVrLRUiOv4: No such file or directory
objcopy: cannot open: /tmp/tmp.WVrLRUiOv4.xz: No such file or directory
*** WARNING: identical binaries are copied, not linked:
/opt/Qt5.7.0/5.7/gcc_64/lib/libicudata.so.56
and /opt/Qt5.7.0/5.7/gcc_64/lib/libicudata.so.56.1
extracting debug info from /home/makerpm/rpmbuild/BUILDROOT/KPIViewer-1.0-1.fc24.x86_64/opt/Qt5.7.0/5.7/gcc_64/lib/libicui18n.so.56.1
*** WARNING: identical binaries are copied, not linked:
/opt/Qt5.7.0/5.7/gcc_64/lib/libicui18n.so.56.1
and /opt/Qt5.7.0/5.7/gcc_64/lib/libicui18n.so.56
extracting debug info from /home/makerpm/rpmbuild/BUILDROOT/KPIViewer-1.0-1.fc24.x86_64/opt/Qt5.7.0/5.7/gcc_64/lib/libicuuc.so.56
extracting debug info from /home/makerpm/rpmbuild/BUILDROOT/KPIViewer-1.0-1.fc24.x86_64/opt/Qt5.7.0/5.7/gcc_64/lib/libicuuc.so.56.1
*** WARNING: identical binaries are copied, not linked:
/opt/Qt5.7.0/5.7/gcc_64/lib/libicuuc.so.56.1
and /opt/Qt5.7.0/5.7/gcc_64/lib/libicuuc.so.56
dwz: Too few files for multifile optimization
/usr/lib/rpm/sepdebugcrcfix: Updated 0 CRC32s, 7 CRC32s did match.
+ '[' '%{buildarch}' = noarch ']'
+ QA_CHECK_RPATHS=1
+ case "${QA_CHECK_RPATHS:-}" in
+ /usr/lib/rpm/check-rpaths
*******************************************************************************
*
* WARNING: 'check-rpaths' detected a broken RPATH and will cause 'rpmbuild'
* to fail. To ignore these errors, you can set the '$QA_RPATHS'
* environment variable which is a bitmask allowing the values
* below. The current value of QA_RPATHS is 0x0000.
*
* 0x0001 ... standard RPATHs (e.g. /usr/lib); such RPATHs are a minor
* issue but are introducing redundant searchpaths without
* providing a benefit. They can also cause errors in multilib
* environments.
* 0x0002 ... invalid RPATHs; these are RPATHs which are neither absolute
* nor relative filenames and can therefore be a SECURITY risk
* 0x0004 ... insecure RPATHs; these are relative RPATHs which are a
* SECURITY risk
* 0x0008 ... the special '$ORIGIN' RPATHs are appearing after other
* RPATHs; this is just a minor issue but usually unwanted
* 0x0010 ... the RPATH is empty; there is no reason for such RPATHs
* and they cause unneeded work while loading libraries
* 0x0020 ... an RPATH references '..' of an absolute path; this will break
* the functionality when the path before '..' is a symlink
*
*
* Examples:
* - to ignore standard and empty RPATHs, execute 'rpmbuild' like
* $ QA_RPATHS=$(( 0x0001|0x0010 )) rpmbuild my-package.src.rpm
* - to check existing files, set $RPM_BUILD_ROOT and execute check-rpaths like
* $ RPM_BUILD_ROOT= /usr/lib/rpm/check-rpaths
*
*******************************************************************************
ERROR 0002: file '/usr/bin/KPIViewer/KPIViewer' contains an invalid rpath '/opt/Qt5.7.0/5.7/gcc_64/lib' in [/opt/Qt5.7.0/5.7/gcc_64/lib]
error: Bad exit status from /var/tmp/rpm-tmp.CbBYR1 (%install)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.CbBYR1 (%install)
What is my fault? Please help me. Thank you for your time.
