5

I had to delete the Sharing Extension I had in my project and start it over from scratch - its working just fine on my iPhone6 now, but its not showing up in the Simulator - which is very weird.

The Photos App in the Simulator for example is unable to see my App. Same goes for the Settings App: its not seeing my App (there's no on/off switch there to enable it.)

I know I did everything right - cause its working fine on the iPhone - but its still a drag cause testing it on my iPhone just takes longer than it would on the Simulator.

I'm thinking there's some tiny little setting - some little checkbox I need to check somewhere to get it working in the Simulator again - any ideas?

Sirab33
  • 1,247
  • 3
  • 12
  • 27
  • Try deleting the app on the simulator and the re-run the app. – Dan Levy Apr 12 '16 at 22:53
  • I did. Like 10 times! :-) I also reset the Simulator - didn't help. – Sirab33 Apr 12 '16 at 23:11
  • 5
    OK - figured it out: when *I recreated* my Sharing Extension Target, it defaulted to iOS 9.3.... while the App is still set to iOS 9.0 - and I was still running it on the 9.0 Simulator. So while that particular Simulator could support the App, it couldn't support its extension. Kinda silly - but I'll leave this up as hopefully someone else down the road will benefit from this as yet another thing to be sure and double-check for as you go about your own debugging... – Sirab33 Apr 12 '16 at 23:26

0 Answers0