1

Is this possible to debug applications on this MCU? Does anyone have experience with this? As datasheet says it is possible to debug in SWD mode but with JLINK /Keil & LPCLINK/LPCEXPRESSO we had no success.

Schematic is a simple breakout board. I soldered SWD pins to MCU's pins. I connected :Pin5:SWCLK/Pin6:SWDIO/Pin3:Reset and GND to LPC812 & JLINK.

Mika Sundland
  • 18,120
  • 16
  • 38
  • 50
Dzzz
  • 21
  • 1
  • 6

1 Answers1

0

Can you show your schematics? SWD should be available.

Sivar
  • 56
  • 3
  • Schematic is a simple breakout board,i soldered SWD pins to MCU's pins. I connected :Pin5:SWCLK/Pin6:SWDIO/Pin3:Reset and GND to LPC812 & JLINK. – Dzzz Mar 06 '16 at 06:21