I'm trying to configure ChillySpot on OpenWRT and not sure what I'm doing wrong. So far what I've done. 1. Added ChilliSpot via web menu to OpenWRT. 2. Added configuration to /etc/init.d/S45firewall from http://www.chillispot.org/chilliforum/topic18-documentation-howto-setting-up-openwrt-as-a-captive-portal-on-wrt54gl.html 3. Configured chilli.conf as per the page above.
There is a configuration mentioned in the manual, but I don't know where to put it to:
lan_ifname=br0
lan_ifnames="vlan0 eth1"
lan_proto=static
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
wan_ifname=vlan1
wan_proto=dhcp
Also, after restarting I don't see the chilli process running (via ps -w).
When I run chilli -fd manually, I don't see any connections when trying to connect to the WiFi router via the phone.
The router is TP-Link with OpenWrt Attitude Adjustment 12.09-rc1. Internet is from external router via wireless connection.
Also, for some reason it says ipkg command doesn't exist so I cannot install anything via terminal.
And, if possible, please explain to me like I'm 5, I'm really new to networking configurations and especially routers.
The questions are:
Where to put the mentioned configuration (lan_iframe=....) ?
What does it mean ?
Why isn't ChilliSpot running on router boot ? The chilli startup file is located in /etc/init.d and contains:
#!/bin/sh /etc/rc.common
# Copyright (C) 2006-2012 OpenWrt.org
START=50
SERVICE_USE_PID=1
SERVICE_PID_FILE=/var/run/chilli.pid
start() {
. /lib/functions/network.sh
local ipaddr
network_get_ipaddr ipaddr lan && \
service_start /usr/sbin/chilli --dns1="$ipaddr"
}
stop() {
service_stop /usr/sbin/chilli
}
Thank you very much for your response!
The raidus daemon resides on a different machine and has been verified to work with radtest and other tools.
