aerospike on openvz 2core 4Gb ram doesn't start and doesn't give errors

Question

after installation without any trouble I've started aerospike on a openvz vps with 2cores and 4gb ram. this is the result:

root@outland:~# /etc/init.d/aerospike start
 * Start aerospike:  asd  [OK]

then check for running asd:

root@outland:~# /etc/init.d/aerospike status
 * Halt aerospike:  asd                                                  [fail]

what is going wrong?

adding logs:

Mar 03 2015 15:17:57 GMT: INFO (config): (cfg.c::3033) system file descriptor limit: 100000, proto-fd-max: 15000

Mar 03 2015 15:17:57 GMT: WARNING (cf:misc): (id.c::249) Tried eth,bond,wlan and list of all available interfaces on device.Failed to retrieve physical address with errno 19 No such device


Mar 03 2015 15:17:57 GMT: CRITICAL (config): (cfg.c:3363) could not get unique id and/or ip address

Mar 03 2015 15:17:57 GMT: WARNING (as): (signal.c::120) SIGINT received, shutting down

Mar 03 2015 15:17:57 GMT: WARNING (as): (signal.c::123) startup was not complete, exiting immediately

Answer 1

This is your config problem

Mar 03 2015 15:17:57 GMT: WARNING (cf:misc): (id.c::249) Tried eth,bond,wlan and list of all available interfaces on device.Failed to retrieve physical address with errno 19 No such device

Mar 03 2015 15:17:57 GMT: CRITICAL (config): (cfg.c:3363) could not get unique id and/or ip address

Basically the vps has a non standard interface name.

The solution is to add your interface name as network-interface-name to the config.

http://www.aerospike.com/docs/operations/troubleshoot/startup/#problem-with-network-interface

Which OS are your using btw?