0

I have a windows 8.1 tablet that only has a mircoUSB connector. I've installed adb & fastboot drivers.

If I connect my Nexus tablet to my Windows tablet via OTG & USB Cables, it's detected fine when the Nexus tablet is booted normally.

I can run adb and browse the Nexus table without issue.

However if I reboot the Nexus tablet to the bootloader and then connect it to the Windows tablet, I get a quick connection sound and an instant disconnection. Nothing appears in Device Manager.

Same Nexus tablet on a Windows 7 laptop or Windows 8.1 PC works fine in bootloader mode.

So what am I doing wrong on the Windows 8.1 tablet ? Should this work via OTG ?

Is it a driver issue ? if it is how do I install the driver when nothing appears in device manager ?

Thanks

Mike Laren
  • 8,028
  • 17
  • 51
  • 70
JeffVader
  • 702
  • 2
  • 17
  • 33
  • Why the down vote ? I'm asking if it's possible and if it should work with an OTG connection. – JeffVader Feb 03 '15 at 16:26
  • Reset Laptop and reinstalled Google Android ADB / Fastboot drivers. Nexus 5 Phone is detected by ADB & Fastboot. Nexus 7 2013 Tablet is only detected by ADB. Need to work out why fastboot is not detected on the Nexus 7. At least I know it's not the tablet or OTG cable as they work with the 5. – JeffVader Feb 06 '15 at 18:42

0 Answers0