3

Trying to test a new CSP under Win 7. Set the boot config to allow kernel debug, run WndDbg and select file:kernel debug and set to local. Attempting to use signtool with my new CSP still results in signature failure check. Environment is:

OS Name:                   Microsoft Windows 7 Home Premium
OS Version:                6.1.7601 Service Pack 1 Build 7601
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Standalone Workstation
OS Build Type:             Multiprocessor Free

System Model:              Dell System Inspiron N7110
System Type:               x64-based PC
Processor(s):              1 Processor(s) Installed.
                           [01]: Intel64 Family 6 Model 42 Stepping 7 GenuineIntel ~2501 Mhz
BIOS Version:              Dell Inc.          A09, 11/18/2011
Windows Directory:         C:\Windows
System Directory:          C:\Windows\system32

Any thoughts on why the presence of the kernel debugger is not preventing the signature check on the test CSP? Does that setup only work in a remote-debug environment?

Mykola
  • 3,343
  • 6
  • 23
  • 39
John Smith Optional
  • 31
  • 1

1 Answers1

0

You'll need a remote debugger to disable the signature check.

There are various mechanisms such as 1394 (FireWire) or Serial Cable by which you can can connect the second computer for remote debugging.

If your CSP can run in a VM, then that would be an option too if you just have the one machine.

softwariness
  • 4,022
  • 4
  • 33
  • 41