0

I'm following this and this links to build a Yocto customized image to galileo board on OSX 10.7 machine.

The Yocto version used is 1.0.1;

When i run bitbake image-custom in meta-clanton_v1.0.1 dir console start like build, but returns the following:

$ ~/meta-clanton_v1.0.1 > bitbake image
The BBPATH variable is not set
DEBUG: Removed the following variables from the environment: TEX_PATH, rvm_version, rvm_path, ...
DEBUG: UI 'knotty' does not require extra cache!
DEBUG: Found bblayers.conf (~/meta-clanton_v1.0.1/conf/bblayers.conf)
DEBUG: LOAD ~/meta-clanton_v1.0.1/conf/bblayers.conf
$ ~/meta-clanton_v1.0.1 >

but stop there. if i do in build folder:

$ ~/meta-clanton_v1.0.1/yocto_build > bitbake image
ERROR: Unable to parse ./poky/meta/conf/layer.conf: file ./poky/meta/conf/layer.conf not found in ~/meta-clanton_v1.0.1/yocto_build
$ ~/meta-clanton_v1.0.1/yocto_build >

I'm doing something wrong? I changed files according instructions provided in links.

Where can i set BBPATH?

Thanks for any possible help

this is my full oe-buildend-internal: pastebin

0andriy
  • 4,183
  • 1
  • 24
  • 37
gcrav
  • 89
  • 1
  • 3
  • 10

1 Answers1

2

Your first error, the one about BBPATH not being set, that is what you'll get when you try a build outside the build-dir. Thus, you should go into your build-dir, like you do in your second attempt.

Regarding the issue in the 2nd attempt, how does your conf/bblayers.conf look like? Without having seen that file, it looks like you have a direct reference to ./poky/meta...

Of course, in the end it might also be related to OSX, I've run OE and bitbake on Linux.

zabumba
  • 12,172
  • 16
  • 72
  • 129
Anders
  • 8,541
  • 1
  • 27
  • 34
  • Thanks anders; sorry for long time in response. I do not have anymore MacOSX. Now that i'm under linux, i will try build on it. – gcrav Dec 11 '15 at 17:52