I am trying to connect an Intel Galileo board to a Mac via the Galileo ethernet port which connects through to a thunderbolt ethernet port on the Mac. I have uploaded an Arduino sketch to start the LAN connection:
#include <SPI.h>
#include <Ethernet.h>
// the media access control (ethernet hardware) address for the Galileo:
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
//the IP address for the Galileo:
byte ip[] = { 192, 168, 0, 2 };
void setup()
{
Serial.begin(9600);
Serial.println("Attempting to start Ethernet");
if (Ethernet.begin(mac) == 0) {
Serial.println("Failed to configure Ethernet using DHCP");
Serial.println("Attempting to configure Ethernet using Static IP");
Ethernet.begin(mac, ip);
}
Serial.print("Your IP address: ");
Serial.println(Ethernet.localIP());
}
void loop () {}
In my network settings, do I put my thunderbolt ethernet as DHCP? or manually enter an ip address? What would be the ip address of my galileo so that I can ssh to it?
