Monitoring Reachability with AFNetworking only on a presented controller

Question

I am using AFNetworking 2.0 to monitor Reachability.

In the viewDidLoad of my main VC I have the following:

// Start monitoring the internet connection
[[AFNetworkReachabilityManager sharedManager] startMonitoring];
[[AFNetworkReachabilityManager sharedManager] setReachabilityStatusChangeBlock:^(AFNetworkReachabilityStatus status) {
    NSLog(@"Reachability: %@", AFStringFromNetworkReachabilityStatus(status));

    // Check the reachability status and show an alert if the internet connection is not available
    switch (status) {
            case -1:
                // AFNetworkReachabilityStatusUnknown = -1,
                NSLog(@"The reachability status is Unknown");
                [self reachabilityNotReachableAlert];
            case 0:
                // AFNetworkReachabilityStatusNotReachable = 0
                NSLog(@"The reachability status is not reachable");
                [self reachabilityNotReachableAlert];
            case 1:
                // AFNetworkReachabilityStatusReachableViaWWAN = 1
                NSLog(@"The reachability status is reachable via WWAN");
            case 2:
                // AFNetworkReachabilityStatusReachableViaWiFi = 2
                NSLog(@"The reachability status is reachable via WiFi");
            break;

        default:
            break;
    }

}];

On top of this main VC I load different view controllers/paths/navigation controllers and dismiss once they have been used.

Question What I am trying to do is monitor the connection but only when the main VC is displayed. For example, if I load a navigation controller on top of the main VC and the connection is lost I would still get the call to the reachabilityNotReachableAlert.

How can I only monitor when the main VC is displayed on screen, without having to run stopMonitoring and startMonitoring all the time?

I guess I can put the stopMonitoring in the prepareForSegue method and then startMonitoring in the viewDidAppear, is there not an easier way to do this?

I think, you forgot `break`s :) – FreeNickname Oct 07 '15 at 11:10 — FreeNickname, Oct 07 '15 at 11:10

djibouti33 · Accepted Answer · 2013-11-25T02:52:16.443

2

Unfortunately no, there isn't an easier way to do this.

However, the plan you mentioned doesn't sound all that bad. You essentially are asking the manager to turn it's notifications off and on, and it needs you to tell it when to do so.

Here's how I do it:

- (void)viewWillAppear:(BOOL)animated
{
    [super viewWillAppear:animated];
    [manager startMonitoring];
}

- (void)viewWillDisappear:(BOOL)animated
{
    [super viewWillDisappear:animated];
    [manager stopMonitoring];
}

edited Nov 25 '13 at 02:52

answered Nov 22 '13 at 23:32

djibouti33

12,102
9
83
116

Thanks, sometimes I over worry about my approach when it often turns out to be the correct way. I have added an update to add in the super calls. – StuartM Nov 24 '13 at 20:49
That's been my biggest struggle as a programmer too. No worries. Anything you write today can be refactored tomorrow. These days, if I find that my worrying and searching for _the_ perfect solution is hindering a ship date, I go forward as long as my approach works with all relevant scenarios. And good catch about calling super, I updated my sample code. – djibouti33 Nov 25 '13 at 02:54

Monitoring Reachability with AFNetworking only on a presented controller

1 Answers1