-1

Have the following commands in the pix 501, which works perfectly:

static (inside,outside) 68.109.247.119 192.168.1.119 netmask 255.255.255.255 0 0
static (inside,outside) 68.109.247.115 192.168.1.115 netmask 255.255.255.255 0 0

Whenever I include these in the 5505, unit accepts configuration, but now I can't ssh in from the outside, among other problems??

user2558372
  • 1
  • 1
  • What version of OS is your 5505 running? Can you show the ACL on the outside interface? BTW, you should use [RFC 5735](http://tools.ietf.org/html/rfc5735) outside addresses, such as 192.0.2.115 – Mike Pennington Jul 31 '13 at 09:28

1 Answers1

0

I assume you're wanting to hit the ASA's "outside" IP via SSH. You have to manually allow SSH to come from any interface other than the management interface if I recall correctly. Try the commands:

ssh 68.109.247.119 255.255.255.255 outside
ssh 68.109.247.115 255.255.255.255 outside
Greg Dickinson
  • 23
  • 1
  • 6