Parsing temperature from lm_sensors command

Question

Currently I'm using lm_sensors to get temperature information off of my server. I'd like to run a cron job that runs lm_sensors every five minutes, grabs the temperature data and puts it into a CSV file. However, I'm at a loss at how to parse the lm_sensors output. I'd like to parse it with either Python or bash as they're my most comfortable languages. I'm going to paste the current output of the lm_sensors command as as an example out the data I'm using. If someone could point me in the right direction on how to strip the data, I can figure the rest out from there. Thanks for the help.

Example output:

$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +0.0Â°C  (high = +70.0Â°C, crit = +90.0Â°C)


atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:       +1.42 V  (min =  +0.85 V, max =  +1.70 V)
+3.3 Voltage:       +3.38 V  (min =  +2.97 V, max =  +3.63 V)
+5 Voltage:         +4.95 V  (min =  +4.50 V, max =  +5.50 V)
+12 Voltage:       +12.48 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:      1510 RPM  (min =  600 RPM)
CHASSIS FAN Speed:  1683 RPM  (min =  600 RPM)
CPU Temperature:     +37.0Â°C  (high = +60.0Â°C, crit = +95.0Â°C)
MB Temperature:      +25.0Â°C  (high = +45.0Â°C, crit = +75.0Â°C)

Burhan Khalid · Accepted Answer · 2013-02-10T08:05:46.593

3

If you want to use Python, use PySensors, but really don't re-invent the wheel. Set up any number of monitoring systems like cacti, munin and others and be done with it.

edited Feb 10 '13 at 08:05

answered Feb 10 '13 at 07:23

Burhan Khalid

169,990
18
245
284

Didn't know PySensors existed. This worked perfectly, thank you. – LandonWO Feb 10 '13 at 08:08

Dmitri · Answer 2 · 2016-07-10T20:44:05.993

Run sensors with the -u switch, for raw output. You'll get is something like this:

    Adapter: PCI adapter
power1:
  power1_input: 21.950
  power1_crit: 124.947

f71889a-isa-0480
Adapter: ISA adapter
+3.3V:
  in0_input: 3.264
in1:
  in1_input: 0.968
  in1_max: 2.040

As you can see, the actual value returned by your hardware sensors will be labled by a string with the form of sensor_input. From that, it should be fairly easy to get the values you want into your script, like my one-line script to monitor the sensors every second:

#!/bin/sh
watch -n 1 "sensors -u | sed -n 's/_input//p'"

score 0 · Answer 3 · answered Feb 10 '13 at 07:22

0

grep to get only the line(s) you want, then cut to get the field you need.

Or a simple awk script.

answered Feb 10 '13 at 07:22

Some programmer dude

400,186
35
402
621

Parsing temperature from lm_sensors command

3 Answers3