Amazon SES Stops Working

Question

I set up Amazon SES and it initially worked for a few hours, then all of a sudden stopped. All of the e-mails I'm sending as, and our domain, have been verified. We are no sending bulk e-mails - only a few hundred per day. Whenever I make changes to the web.config it seems to allow it work again for another 2-3 hours. For example, It stopped working so I switched port 587 to 25, and it began working for 2-3 hours, then stopped. Then I switched back to 587 and the same thing happened. Once it stops working it doesn't ever seem to start again on its own. It is running on two load balanced servers, asp.net framework v2.0, IIS 7.5. Here is the code I'm using:

web.config:

<system.net>
  <mailSettings>
    <smtp deliveryMethod="Network" from="no-reply@ourdomain.com">
      <network defaultCredentials="false" host="email-smtp.us-east-1.amazonaws.com" userName="***" password="***" port="587" />
    </smtp>
  </mailSettings>
</system.net>

c# code:

var smtpClient = new SmtpClient() { EnableSsl = true };

var mailMessage =
    new MailMessage(fromAddress, toAddress, subject, body)
    {
        IsBodyHtml = true
    };

smtpClient.Send(mailMessage);

Here are the two errors I've been receiving:

The following exception was thrown by the web event provider '(null)' in the application '/' (in an application lifetime a maximum of one exception will be logged per provider instance):

System.Web.HttpException: Unable to send out an e-mail to the SMTP server. Please ensure that the server specified in the <smtpMail> section is valid. ---> System.Net.Mail.SmtpException: Failure sending mail. ---> System.IO.IOException: Received an unexpected EOF or 0 bytes from the transport stream.
   at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count)
   at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Threading.ExecutionContext.runTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.Mail.SmtpConnection.Flush()
   at System.Net.Mail.ReadLinesCommand.Send(SmtpConnection conn)
   at System.Net.Mail.SmtpConnection.GetConnection(String host, Int32 port)
   at System.Net.Mail.SmtpClient.Send(MailMessage message)
   --- End of inner exception stack trace ---
   at System.Net.Mail.SmtpClient.Send(MailMessage message)
   at System.Web.Management.MailWebEventProvider.SendMail(MailMessage msg)
   --- End of inner exception stack trace ---
   at System.Web.Management.MailWebEventProvider.SendMail(MailMessage msg)
   at System.Web.Management.SimpleMailWebEventProvider.SendMessageInternal(WebBaseEventCollection events, Int32 notificationSequence, Int32 begin, DateTime lastFlush, Int32 discardedSinceLastFlush, Int32 eventsInBuffer, Int32 messageSequence, Int32 messagesInNotification, Int32 eventsInNotification, Int32 eventsLostDueToMessageLimit)
   at System.Web.Management.SimpleMailWebEventProvider.SendMessage(WebBaseEvent eventRaised)
   at *****.Global.SimpleMailWithSslWebEventProvider.ProcessEvent(WebBaseEvent raisedEvent)
   at System.Web.Management.WebBaseEvent.RaiseInternal(WebBaseEvent eventRaised, ArrayList firingRuleInfos, Int32 index0, Int32 index1)

The following exception was thrown by the web event provider '(null)' in the application '/' (in an application lifetime a maximum of one exception will be logged per provider instance):

System.Web.HttpException: Unable to send out an e-mail to the SMTP server. Please ensure that the server specified in the <smtpMail> section is valid. ---> System.Net.Mail.SmtpException: Service not available, closing transmission channel. The server response was: Timeout waiting for data from client.
   at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
   at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
   at System.Net.Mail.SmtpClient.Send(MailMessage message)
   at System.Web.Management.MailWebEventProvider.SendMail(MailMessage msg)
   --- End of inner exception stack trace ---
   at System.Web.Management.MailWebEventProvider.SendMail(MailMessage msg)
   at System.Web.Management.SimpleMailWebEventProvider.SendMessageInternal(WebBaseEventCollection events, Int32 notificationSequence, Int32 begin, DateTime lastFlush, Int32 discardedSinceLastFlush, Int32 eventsInBuffer, Int32 messageSequence, Int32 messagesInNotification, Int32 eventsInNotification, Int32 eventsLostDueToMessageLimit)
   at System.Web.Management.SimpleMailWebEventProvider.SendMessage(WebBaseEvent eventRaised)
   at *****.Global.SimpleMailWithSslWebEventProvider.ProcessEvent(WebBaseEvent raisedEvent)
   at System.Web.Management.WebBaseEvent.RaiseInternal(WebBaseEvent eventRaised, ArrayList firingRuleInfos, Int32 index0, Int32 index1)

I tried to get help on the Amazon forums but haven't had any luck. It seems like something is interfering with the connection but I don't know what. Any ideas? Thanks.

score 25 · Accepted Answer · edited Apr 13 '17 at 12:13

This sounds like a tricky issue indeed - I'm not 100% positive on this, but you seem to miss disposing the SMTP client, which is mentioned in Sending email is often very slow after changing to VPC instance to cause the very error you are seeing:

When I do not dispose of the SmtpClient, I get the error...

'Service not available, closing transmission channel. The server response was: Timeout waiting for data from client.'

This would actually be a good explanation for intermittent problems, i.e. depending on the executed code path this issue could trigger the SMTP connection to Amazon SES to hang, which is obviously remedied by switching to another port, implying the connection being reset - that's what the SmtpClient.Dispose Method ensures as well:

Sends a QUIT message to the SMTP server, gracefully ends the TCP connection, and releases all resources used by the current instance of the SmtpClient class.

Accordingly, an appropriate pattern would be to facilitate a using Statement, as demonstrated in Getting Started with Amazon SES and .NET:

  String username = "SMTP-USERNAME";  // Replace with your SMTP username.
  String password = "SMTP-PASSWORD";  // Replace with your SMTP password.
  String host = "email-smtp.us-east-1.amazonaws.com";
  int port = 25;

  using (var client = new System.Net.Mail.SmtpClient(host, port))
  {
    client.Credentials = new System.Net.NetworkCredential(username, password);
    client.EnableSsl = true;

    client.Send
    (
              "FROM@EXAMPLE.COM",  // Replace with the sender address.
              "TO@EXAMPLE.COM",    // Replace with the recipient address.
              "Testing Amazon SES through SMTP",              
              "This email was delivered through Amazon SES via the SMTP end point."
    );
  }

Please note that the sample is using port 25, which I highly recommend to avoid due to the usually implied sending restrictions, see Addendum below for details regarding the respective Amazon EC2 throttling.

Good luck!

Addendum

Amazon EC2 throttling on port 25

You are probably aware of this (and I actually don't think it's an issue here), but Amazon EC2 imposes default sending limits on email sent via port 25 and throttles outbound connections if you attempt to exceed those limits which still applies when using Amazon SES, see Amazon SES SMTP Issues:

You are sending to Amazon SES from an Amazon EC2 instance via port 25 and you cannot reach your Amazon SES sending limits or you are receiving time outs — Amazon SES EC2 imposes default sending limits on email sent via port 25 and throttles outbound connections if you attempt to exceed those limits. To remove these limits, submit a Request to Remove Email Sending Limitations. You can also connect to Amazon SES via port 465 or port 587, neither of which is throttled.

Consequently I'd remove port 25 out of your testing/switching scenario and use ports 465/587 only instead in order to avoid false leads (as quoted you could also request to get this limitation removed though, but it will take a few hours and port 25 seems to be best avoided in the first place) - it's a bit unfortunate that several official Amazon SES samples are using port 25 without even mentioning this easily triggered issue indeed.

Thanks for the reply, I will switch to port 587. I agree that it seems to be a connection reset issue, but SmtpClient is actually not disposable in the 2.0 framework. Perhaps that's the problem, in which case I'll need to find a work around. — StronglyTyped, Jan 29 '13 at 13:18
Had to abandon the Amazon solution since we couldn't get it to work in a timely manner. I marked this as the answer because I think these solutions will likely solve problems others may be having. Microsoft Exchange increased their sending limits so we're using them instead - before, they were set too low which is why we explored the Amazon option. — StronglyTyped, Aug 08 '13 at 17:15
I was having this exact same issue and even though I was on .Net 4, I had no idea SmtpClient was now disposable. Once I switched to a using statement everything started working MUCH smoother. Nice find! — Scott Salyer, Jan 29 '14 at 19:08
Disposing the SmtpClient made this work for me too. I thought we could use a fairly long lifetime on that object, but instead it looks like it should be pretty short. — heneryville, Jul 11 '14 at 14:37

score 2 · Answer 2 · answered Oct 20 '15 at 14:40

Although this question is specific to .NET v2.0, I recently came across this issue on .NET v4.5, as well. Even after adding using around SMTP client (as suggested in earlier posts), I was still intermittently receiving this error. After many hours of research I came accross AWS's support for STARTTLS port (2587; http://docs.aws.amazon.com/ses/latest/DeveloperGuide/smtp-connect.html) and, in the very fine print, Microsoft states when "EnableSsl" is true on SMTP client the client expects a STARTTLS session (https://msdn.microsoft.com/en-us/library/system.net.mail.smtpclient.enablessl(v=vs.110).aspx). Thus, after updating my port to 2587 and surround the SmtpClient in a "using {}" I was able to successfully send ~20k emails without reproducing the error.

Thus, the working configuration would be:

<system.net>
  <mailSettings>
    <smtp deliveryMethod="Network">
      <network host="email-smtp.us-west-2.amazonaws.com" port="2587" enableSsl="true" password="password" />
    </smtp>
  </mailSettings>
</system.net>

One disclaimer is that I still don't fully understand the true configuration of either AWS or .NET SMTP client, so this is still a bit circumstantial.

sbmandav · Answer 3 · 2013-01-28T18:57:39.410

0

i am also using AWS ses service

 smtp deliveryMethod="Network" from="XXXXXXX@ZXXX.com"
    network enableSsl="true" host="email-smtp.us-east-1.amazonaws.com" userName="******" password="*********" port="25" 
 smtp

Hope this works for you.

edited Jan 28 '13 at 18:57

answered Jan 28 '13 at 18:52

sbmandav

1,211
3
16
25

1

The only difference in your code from mine is: enableSsl="true". That property is not supported in the config for framework v2.0, which is what I'm using, but you can see it is added when the SmtpClient object is initialized in my c# code. – StronglyTyped Jan 28 '13 at 19:17

Amazon SES Stops Working

3 Answers3

Addendum

Amazon EC2 throttling on port 25

Linked