Questions tagged [windows-server-2012]

Windows Server 2012 is a server operating system from Microsoft. It went RTM on August 1st of 2012, general release on September 4, 2012, and reached End Of Life on October 10, 2023. Like its predecessor, Server 2008 R2, it is only available in 64 bit versions. It contains many substantial changes over it predecessor, and substantially streamlines the number of available versions, which are down to four: Foundation, Essentials, Standard and Datacenter.

Server 2012 Logo

Windows Server 2012 is a server operating system from Microsoft. It went RTM on August 1st of 2012, and to general release on September 4, 2012. Like its predecessor, Server 2008 R2, it is only available in 64 bit versions. It contains many substantial changes over it predecessor, and substantial streamlines the number of available versions, which are down to four: Foundation, Essentials, Standard and Datacenter.

The editions and their features are laid out in a table at Wikipedia, but substantial new features and changes include:

  • Metro, a new Graphical User Interface (based on Microsoft's Metro design language) which is also present in Windows 8.
  • A new FileSystem, ReFS (Resilient File System)
  • A new role, IP address management (IPAM)
  • A new IIS version (IIS 8.0)
  • Simplified and updated Active Directory functionality
  • A new version of Hyper-V (Microsoft's virtualization technology)
  • Much expanded PowerShell commandlet library: over 2300, compared with approximately 200 in Server 2008.
  • The ability to switch between Server Core and full modes without a full re-installation, and the addition of a new installation option that excludes most of the GUI.

Minimum system requirements for installing and running Server 2012 are:

  • 1.4 GHz 64-bit processor
  • 512 MB RAM
  • 32GB disk space

Maximum hardware scalability in Server 2012 is also improved, currently:

  • 640 logical processors
  • 4 TB RAM
  • 64 fail-over cluster nodes
2822 questions
1
vote
1 answer

Can I transfer/Migrate Windows server 2003 RDS cals to Windows Server 2012 R2?

I have 9 W2K3 RDS (Terminal Services) CALs, if I upgrade to Windows server 2012 R2, Can I transfer/migrate the CALs to the new server? Thank you,
1
vote
1 answer

Server 2012 scheduled task for SharePoint 2013 backup

I have Windows Server 2012 with SharePoint 2013 setup. I created a PShell script and saved it to a ps1 which backs up the Farm: Add-PsSnapin Microsoft.SharePoint.Powershell Backup-SPFarm -Directory d:\backup\Farm -BackupMethod full If I run this…
1
vote
1 answer

Unable to open/copy files on an encrypted UNC share after reboot of file server

I have 2 Windows 2012 environments. The first is a CMS that is accessing files on a the second server (file server). One of the shares that I have on the file server is marked as encrypted. When I set this up, everything works great, documents…
1
vote
1 answer

Windows Installer Error 1721 on uninstall

I'm trying to uninstall a program from Windows Server 2012, but when I do, it tells me: Error 1721: There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support…
DarkMoon
  • 1,039
  • 15
  • 30
1
vote
1 answer

HP proliant DL320 g5p Ram

I have 2 HP Poliant DL320 G5p servers that I am trying to do a ram upgrade on. They currently have 5 GB of DDR2-PC2 6400 non-registered, unbuffered and ECC. I am trying to install 8GB (4x2GB) and the RAM I ordered matches the 2 GB DIMMS number for…
1
vote
1 answer

IPv6 Client Service

I got a Windows Server 2012 which provides DHCPv4 and DHCPv6. The NIC on the Server got 2 IPv6 addresses. I found out that the second IPv6 comes from the "IPv6 Client Service" which (only the service - not the IPv6) I do need for another Service,…
1
vote
1 answer

openvpn windows routes ip forwarding enabled but not working

I have setup an openvpn network, I have in my client windows two interfaces, one public with IP 1.2.3.4 and the openvpn interface, with ip 192.168.244.10 I am able to ping from windows to the server's interface IP 2.3.4.5 and wireshark says that the…
maiky
  • 139
  • 2
  • 3
  • 13
1
vote
0 answers

MSW2012R2 StorageSpaces + SSD tiering. Unknown Placement Status

I use StorageSpaces with tiering. I have several vhdx images that I want to be constantly pinned to SSD on my tier. I use command: Set-FileStorageTier –FilePath "path" -DesiredStorageTier "tier" Then I manually start optimize-volume command. After…
piotrektt
  • 184
  • 2
  • 14
1
vote
1 answer

Windows Server Account locked - says need to use Remote Web Access

Windows Server 2012 Essentials. I tried to log into the launchpad today and also the dashboard. Both give the following error: "The password for this user account has expired. To reset the password for this account, go to the Remote Web Access site…
djoyce
  • 33
  • 1
  • 1
  • 4
1
vote
0 answers

wdsutil claims Windows Server 2012 R2 drivers are unsigned, but they have a valid certificate

I'm trying to import some Windows Server 2012 R2 drivers to a driver group in WDS. My WDS server is running Windows Server 2012 (not R2). When I run the following command: WDSUTIL /Add-DriverPackage /InfFile:"E:\Drivers\Latest\WS2K12R2\ocnd64.inf"…
1
vote
1 answer

Windows Server 2012 non-paged pool maximum

How to view Windows Server 2012 Datacenter non-paged pool maximum on a production server? As the server is a production server, I would not want to install anything on it. I have 7 GB physical and non-paged pool usage seems to be around 50 MB Edit:…
Pitchmatt
  • 123
  • 1
  • 5
1
vote
1 answer

NTP offset between PDCe and DC (Both Hyper-V)

I'm facing an issue, here is the context: 1 PDCe (192.168.1.3 and Hyper-V virtualized) is set as NTP server, its source for time is VM IC Time Synchronization. 1 DC (Hyper-V virtualized) is retrieving NTP informations from PDC, mentioned above,…
1
vote
2 answers

Scan through USB connected printer on Print Server

I have two printers, a Lexmark laser printer, and a Canon colour printer/scanner. They are both hooked up via USB to my Print Server. They are set up in Print Management and shared as \\PS1\Lexmark and \\PS1\Canon. When the client computers use the…
1
vote
1 answer

Server 2012 Forwards

I am running server 2012 and I wanted to setup a domain that I am using as a public domain on external dns servers, i.e. mydomain.com. I want to be able to have it resolve internal boxes: internal1.mydomain.com 10.0.0.1 internal2.mydomain.com …
VirtualRules
  • 11
  • 1
  • 3
1
vote
1 answer

Event ID: 2002 Source: IIS-W3SVC-PerfCounters on Windows Server 2012

My server is showing on Event Viewer this error every hour. Log Name: Application Source: Microsoft-Windows-IIS-W3SVC-PerfCounters Date: 03/10/14 9:07:42 Event ID: 2002 Task Category: None Level: Error Keywords: …