Questions tagged [ups]

uninterruptible power supply

An uninterruptible power supply, also uninterruptible power source, UPS or battery/flywheel backup, is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. A UPS differs from an auxiliary or emergency power system or standby generator in that it will provide instantaneous or near-instantaneous protection from input power interruptions by means of one or more attached batteries and associated electronic circuitry for low power users, and or by means of diesel generators and flywheels for high power users. The on-battery runtime of most uninterruptible power sources is relatively short—5–15 minutes being typical for smaller units—but sufficient to allow time to bring an auxiliary power source on line, or to properly shut down the protected equipment.

enter image description here

Source: wikipedia

271 questions
2
votes
1 answer

UPS Batteries different capacity

I'm trying to get a replacement battery for a Cyberpower UPS model CP425HG. The original battery is 12v, 3.6Ah. However, there are not identical batteries in my area, only 12v, 1.2 amp hour batteries and 12v, 7 amp hour batteries. Is it dangerous to…
2
votes
2 answers

How to administer an APC Smart UPS 6000?

I did a scan on a APC Smart UPS 6000 that is connected to the network, and it was discovered with a particular mac address and 62078 and 999 closed ports. I tried using telnet to login to the server and also ssh on that port; is there some sort…
leeand00
  • 4,869
  • 15
  • 69
  • 110
2
votes
2 answers

Two APC Symmetra LX 16kVA into one common output?

We have 2x APC symmetra LX 16kVA units running at the moment and have read (in Eaton's documentation) that their UPSs can have a common synchronised output (based on input phase or set phase with a master/slave clock type arrangement) -…
Myles Gray
  • 659
  • 4
  • 12
  • 33
2
votes
3 answers

How should mains power be conditioned for devices not protected by a UPS?

UPSes protect devices from more that just power outages. I've got a Schneider SURTA2200XL UPSes (manual here). It protects against all of the following: undervoltage (aka brownouts) overvoltage power surges (e.g. lightning strikes, transformer…
alx9r
  • 1,643
  • 3
  • 17
  • 38
2
votes
0 answers

Configuring apc ups with ap9630 network management card

I have an apc smt2200 with a network management card. It has a web server on board from which I can configure how it works. Some servers are powered by that ups and they all have PCNS software which connects to the web server on the ups. I would…
Filippo
  • 377
  • 5
  • 18
2
votes
4 answers

RAID Battery and UPS

I have a server with a UPS, life on battery is around 20-30mins, the server has a 2405/128MB without BBU, I am just confused as to do I really need a BBU card? Surely if the UPS is working, during a power failure, t should allowed plenty of time for…
user175615
  • 29
  • 2
2
votes
1 answer

Running apcupsd on server core 2012?

Is it possible to run acpupsd on server core 2012? I went out and bought some Back-UPS (with USB cable signalling) to run some Hyper-V servers before I realized "that wont work" :-) Back-UPS are not supported by Business Edition, which does support…
2
votes
3 answers

Hyper-V 2012 gracefully shutdown when UPS battery running out

Background: We're running a couple of Virtual servers in Hyper-V at a small office using Windows 2008 R2. We only have 1 physical host (and we aren't planning to change that any time soon). We're looking to move to Hyper-V Server 2012. Currently we…
Greg
  • 463
  • 2
  • 12
  • 23
2
votes
2 answers

Is there a minimum distance between UPS and Cat 6 cabling?

We've just re-wired our Sales Office using Cat 6 cabling into a new data rack. The cable loops down at the base, in case we need to use that slack in the future to re-terminate it, or to cover any other eventuality. This spare cable currently sits…
Matty Brown
  • 675
  • 3
  • 13
  • 24
2
votes
1 answer

Correct UPS and PDU sequence

I'm pretty inexperienced when it comes to setting up power for a network rack. I have a location that has a dedicated 20 amp circuit with a LP-20P socket. I have a APC UPS 3000XL rackmount UPS and a TripLite PDUMH20 PDU. I'm looking at the current…
user62491
2
votes
1 answer

Two servers, two PSU's, Two UPS

I have two server, with redundant PSU's connected to two UPSs. The UPSs are APC Smart-UPS 1500VA and I want to shut down the servers when the power gets low. However, because I have a redundant PSU then it becomes a bit difficult to manage. How am I…
VBwhatnow
  • 111
  • 6
2
votes
1 answer

Remotely Shut down Hyper V server from Bat file (UPS shutdown)

I have set up an APC UPS on our 2003 Small Business Server with an APC SmartUPS connected to it via the USB port. I have set up PowerChute on the server with the following settings: After 1 minute with no power run command file, after 2 mins start…
user117111
  • 21
  • 2
2
votes
2 answers

What are the essential considerations for setting up systems in a location with unreliable power?

I deal with a lot of remote offices located in parts of the world where the local grid power supply is unreliable. Power can go off anytime with no warning, with outages ranging from minutes to days Power fluctuation is wild, with spikes and brown…
dunxd
  • 9,632
  • 22
  • 81
  • 118
2
votes
1 answer

PDU With Configurable AMP Limit

I have a 20 AMP/120V circuit. The only device plugged into this circuit is a 1000 Watt Dell UPS. Right now several devices plug directly into the 1000 Watt UPS. I wanted to order a PDU to help untangle my cabling a bit. Problem: If I order a 16…
user426724
  • 289
  • 1
  • 2
  • 10
2
votes
3 answers

Will a NEMA L5-20P plug work in a NEMA L5-30R receptacle?

I need to purchase a UPS & PDU and want to know if they will be compatible. Will the plug of the PDU be able to plug into this UPS? The UPS: APC Smart-UPS X 3000VA Rack/Tower LCD 100-127V with Network Card The PDU: Rack PDU, Basic, Zero U, 20A,…
jftuga
  • 5,731
  • 4
  • 42
  • 51