Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [ubiquiti]

Ubiquiti Networks (also UBNT) is a manufacturer of network products, best known for its "UniFi" WiFi antennas and access points.

58 questions
0
votes
1 answer

Ubiquiti EdgeRouter uses default route over static when responding to ICMP

I need to have a working connection between two router devices and the subnets behind them. Everything else in the setup seems to work except one static route. Here is the basic information about my setup: Juniper: Vlan95 10.250.0.1/24 Vlan1 …
nyoatype
  • 65
  • 1
  • 9
0
votes
1 answer

Setting up VLAN: pfSense and UniFi Gear (150w PoE switches, EdgeSwitch 16XG, UniFi Controller, 13 UniFi APs)

I'm have a tremendously difficult time setting up something that seems like it should be easy: VLANS with a pfSense gateway and a bunch of Ubiquiti UniFi gear. The frustrating thing is I've set this up before with a pfSense gateway and UniFi APs,…
Jaxian
  • 169
  • 3
  • 9
0
votes
1 answer

ubuntu upgrade apt conflicts using apt

I have a ubiquity xg-server which i just upgraded from ubuntu 16 to 18 i noticed a lot of stuff got disabled mainly due to being 3rd party repos. I reenabled the ones i had and started to enable all my software. I am getting this error…
mangusbrother
  • 219
  • 1
  • 4
  • 9
0
votes
0 answers

New Ubiquiti router potential DNS issues?

We have a SonicWall as our business router for around 50 ish people. Recently it was getting super slow, and it turns out the fans in it died and it was overheating. I've replaced it with a Ubiquiti EdgeRouter 4, and everything sped right up, and so…
Brian Leishman
  • 111
  • 1
  • 8
0
votes
1 answer

DNS/DHCP configuration in /config/config.boot vs. /etc/dnsmasq.d

I have an Edgerouter 4 and I am trying to make sense of the configuration areas for DHCP and DNS, when use-dnsmasq enable is set. I see four places where the configuration can be done: from the command line (set service dns forwarding ... seems to…
WoJ
  • 3,607
  • 9
  • 49
  • 79
0
votes
1 answer

intermittent drops on switches

I have a lab environment with 7 48-port switches (Ubiquiti ES-48-500W). All of them are connected to 3 16-port aggregation switches (Ubiquiti ES-16-XG) via fiber. All of the switches are brand new, and all of them are in the same room. Fiber modules…
E C
  • 99
  • 3
  • 9
0
votes
1 answer

Static Route Setup on Windows 10 for Split Tunnel VPN

I have an L2TP VPN service setup on a Ubiquity USG 3 Router. I trying to set up a split tunnel service on Window 10 machine so that: Internet Traffic is sent outside VPN (for speed) Certain Local IP is sent through the VPN tunnel I've unchecked…
Nathan
  • 101
  • 1
  • 2
0
votes
1 answer

Networking - Unbiquiti over 2 subnets

Just a quick question. We have just bought 2 of the ubiquiti network p2p bridges here: https://www.ubnt.com/airmax/nanobeam-ac-gen2/ I have one office on 192.168.1.X and the other across the road on 192.168.0.X My question is what would be best,…
weazel91
  • 49
  • 5
0
votes
1 answer

Windows 10 WLAN prelogon not working

First time posting here, although I've found many helpful answers on the various StackExchange sites over time. My current problem is that I cannot get WLAN prelogon to work on wireless laptops, no matter what I do. If the user logs on once using a…
Thorkull
  • 11
  • 3
0
votes
1 answer

How can I restrict access (by IP) to devices behind my Edge Router?

I have a Ubiquiti ERPro-8 with some servers behind it. I would like to allow access to those servers, on specific ports. But I would like to restrict access to those servers by IP address. For example: Allow access to 10.0.1.40:8080 from…
Sathed
  • 101
  • 4
0
votes
2 answers

Nagios SNMP: Different OIDs for the same value

With Nagios, I want to read a device name of hundreds of Ubiquity devices. This value has one OID on some of them and another on others. The best way I got so far is using this script: $1/check_snmp -H $2 -o .1.2.840.10036.3.1.2.1.3.5 >…
Antonín Procházka
  • 103
  • 3
0
votes
1 answer

Unable to port forward Docker Nginx reverse proxy

I've spent a lot of time on this, and it's time to use a lifeline. I'm running the wonderwall/nextcloud Docker container, and I set up an Nginx container to proxy it. It works fine in my internal network, but when I try to port forward through my…
JCardenas
  • 21
  • 5
0
votes
1 answer

Does Ubiquiti UniFi have any form of PineApple Defense?

Have an ongoing problem with WiFi RDP clients being disconnected while stationary and much more often when roaming. The experience is much like being hacked or denial-of-service. The PineApple took those WiFi hacking attempts and made them easy…
rjt
  • 578
  • 6
  • 26
0
votes
0 answers

Can't connect to UniFi APs with ChromeOS ChromeBox

We have recently replaced our aging HP access points with UniFi AP-AC-Pro and AP-Pro access points. They have all been setup and are working well with all client devices, with the exception of a single Acer ChromeBox CXi - attempting to connect to…
tombull89
  • 2,964
  • 8
  • 41
  • 52
0
votes
0 answers

Wifi connection fails until user logs in, then drops when the log out

Scenario: We have a number of PCs (50+) on a small corporate network, running Windows 10, MS server 2012 running the normal services (AD, DHCP, DNS etc) and a Ubiquity based network and wireless APs. Wifi authenticates through RADIUS. We are in the…
Digital Lightcraft
  • 369
  • 4
  • 19
1 2
3
4