Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [tp-link]

34 questions
0
votes
1 answer

Router Wi-Fi not working after power failure

I know this sounds lame, but it's the second consumer router in as many months which has Wi-Fi issues after power failures. My electric utility company sent notices this morning that they were working on the power grid, and that we'll have outages…
Bogdan Stăncescu
  • 111
  • 2
0
votes
0 answers

Access subnet from other subnet

We're running a FritzBox from our DSL-Provider in front of our TP-Link router. Now we want to use the DHCP-Server of the TP-Link, so all clients get a IP of the range 192.168.0.0/16. But we also want to access the 192.168.0.0/16 network from our…
ForJ9
  • 145
  • 4
0
votes
1 answer

BT's 5 static IPs over PPPoE with TP Link Dual WAN TL-ER6020 router

Recently i bought nice dual WAN router TP Link TL-ER6020 to use it with two BT(British Telecom) Infinity Broadband lines with Openreach VDSL modems (Huawei HG612 , unlocked, as told Ebay seller). One of the broadband lines (WAN1) has 5 static…
Y Borys
  • 145
  • 1
  • 5
0
votes
2 answers

WiFi AP Broadcasts DHCP Requests to all VLANs

My setup looks like this: Switch (T1600G-28TS) ------------------------------- | 1 | | | 6 | 5 | | ... | ------------------------------- | | | * SSID: NW1 | VLANID: 2 | | | …
user1859022
  • 101
  • 3
0
votes
1 answer

Using an LTE Dongle on a router's USB port

I know there are routers which support LTE/3G dongles (like the FRITZ!box by AVM). But if I have got a router, which officially does not suppport these dongles, but has got USB ports for NAT storage, can it support LTE/3G dongles with the correct…
Benni
  • 103
  • 2
0
votes
1 answer

How to prevent router TP-LINK TD-8840T from disconnecting when idle?

I have the router TD-8840 from TP-LINK and it works well, but disconnects after some minutes it is idle. How can I disable that feature? I want that it will be connected allways.
eKek0
  • 101
  • 1
  • 4
0
votes
1 answer

How to connect to a server via wifi device using a dialer(vpn)?

Question: How to connect to a server via Wifi device using a dialer? Description: I have a dialer that I use to connect to my cable network server in order to access the internet. I connect using the Ethernet(STP) cable. Dialer: is a software that…
KMan
  • 111
  • 2
0
votes
1 answer

TL-WR740N router or switch?

In this description page, it says that: The TL-WR740N is a combined wired/wireless network connection device integrated with internet-sharing router and 4-port switch. So, it's a router for wireless, and with 4 ports switch? Can a single…
The Student
  • 103
  • 4
0
votes
2 answers

How to reset tp link router settings

I have changed the routers IP Address to 192.168.1.1 to 192.168.3.1. But now I cant access them both. What do I do?
user28233
  • 125
  • 1
  • 3
  • 12
0
votes
1 answer

Allow broadcast traffic between VLANs in TPLink Omada SDN

I am managing a network with a few VLans, mostly ethernet connected. Everything is controller through TpLink Omada SDN. It seems that there is no way to pass broadcast packets between VLANs in Omada SDN. The scenario is to send a magic package from…
Odys
  • 221
  • 5
  • 15
0
votes
0 answers

How to properly setup a Guest Network on the TP-Link EAP115 AP?

I have a TP-Link EAP115 Access Point. I would like to setup a guest network, so that people who come to my house and use the WiFi cannot port scan the rest of my network. And I really only care about the wired devices: if several people are all on…
JonathanDavidArndt
  • 1,424
  • 3
  • 20
  • 29
0
votes
1 answer

Can't configure VPN on tp-link router using PSK

I've bought a VPS server and configured stronswan VPN. I was able to configure VPN on my Windows laptop(usinf certificate provided by Strongswan Web UI) and my android smartphon(configuration is provided by Strongswan Web UI) but I was not able to…
gstackoverflow
  • 101
  • 2
0
votes
1 answer

What could cause a PD (access point) to not detect / pull power from a PSE (switch)?

I've got a PD (Powered Device : Ubiquity AirCube ISP access point) and a PSE (Power Sourcing Equipment : TP-Link TL-SG1005P switch). My understanding is that there are two ways of supplying power : A and B. The PSE (switch) in this case supports A.…
sbrattla
  • 1,578
  • 4
  • 28
  • 52
0
votes
0 answers

TP-Link JetStream switch - Giving Out IP's to random devices

We have a fairly large, network with several switches, and a router. Suddenly we observed two PC's getting IP addresses in a range we don't use. The network uses the 10.0.0.0/16 range, and one device always got 192.168.0.114, with no internet…
Király István
  • 377
  • 4
  • 10
0
votes
1 answer

How do I provide Internet Access to both of my VLANS?

I have a TP-LINK T1600G-28TS, and I have 2 different VLANS (10.0.0.0/24 ID 101 and 10.1.1.0/24 ID 102), their IP addresses are defined by the switch's DHCP server. This part is working fine, I can see other devices in the same VLAN, and can't see…
user613017
  • 1
  • 1
  • 1
1
2
3