Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [supermicro]

Supermicro is a computer hardware company headquartered in San Jose, California. They design and manufacture server equipment.

286 questions
0
votes
0 answers

Finding maximum supported storage for RAID controller (INTEL esb2)

We have here a supermicro server with 24 SATA slots. It has an ESB2 onboard RAID controller with intel matrix storage manager rom v5.6.4.1002 and 6 SATA ports on the mainboard. Here is the…
user6329530
  • 237
  • 2
  • 13
0
votes
1 answer

Supermicro SuperServer 5037MC-H8TRF PXE boot infinite retry

I can successfully PXE-boot the blades in a Supermicro SuperServer 5037MC-H8TRF. However if my PXE server is not currently up, the blades try to get a DHCP on each interface once before the boot agent gives up and asks you to press any key to try…
Darryl Turner
  • 1
  • 1
0
votes
1 answer

Supermicro X9DBL-3F Xenserver 7 boot stops

The configuration is a Supermicro X9DBL-3F motherboard with 2x Intel Xeon E5-2403 Cpu's. In the Bios the settings under Advanced \ Chipset Configuration \ North Bridge \ Integrated IO Configuration \ Intel(R) VT-d is enabled. After the…
wurlog
  • 333
  • 1
  • 4
  • 17
0
votes
1 answer

How to configure LSI RAID from ubuntu?

I have a Supermicro AOC-USAS2LP-H8iR RAID card, which uses an LSI RAID controller. Unfortunately, I can't seem to get the pre-bios prompt via IPMI (connections drops just before it gets there), so I'm trying to configure it via Ubuntu. I've seen…
Keno Fischer
  • 251
  • 1
  • 3
  • 9
0
votes
1 answer

Super Micro hangs in BIOS enumerating devices

I've got a Super Micro X8DTT-H server. I've been wrestling with various issues trying to get the server installed with CentOS 6. At one point I had the server booted from the IPMI-attached DVD drive. I wanted to reboot the server but I got an error…
Sol
  • 347
  • 1
  • 4
  • 12
0
votes
1 answer

Cannot boot server after power failure

After a power failure, my server cant boot anymore. Switching power on do nothing. No fans, no boot, no sound. Nothing. Shorting the power switch on the motherboard also do nothing. My motherboard is a Supermicro MB and have IPMI on it. I can…
Syaiful Nizam Yahya
  • 172
  • 6
0
votes
1 answer

IPMI and Recursive AD group permissions

It seems that SuperMicro's IPMI service does not allow for Active Directory permissions to be recursive, that is, a user in a group, with that group in a group that has admin permissions. Is there a workaround for this, or is it simply not…
user125615
  • 1
0
votes
1 answer

Can't Install CentOS 7 - Black Screen

I'm attempting to install CentOS 7 on a new set of Supermicro Twin2 servers (motherboard model X10DRT-PT). I've attempted the install via a local USB drive as well as via virtual media mounted through IPMI and through a Raritan KVM. All have the…
dodexahedron
  • 137
  • 12
0
votes
1 answer

Using DDR4 SDRAM in a Supermicro X10SRL-F Mobo that wants DDR4 ECC SDRAM?

Hey so I got my hands on a Supermicro X10SRL-F motherboard, and bought myself a Xeon off ebay, but I neglected to get any ram, (money reasons). I figured however, that I might be able to pick something up from my local Fry's, but they don't seem to…
oh_hello
  • 3
  • 2
0
votes
2 answers

Problems with Supermicro X10DRi-T NICs

I've got a workstation with Supermicro X10DRi-T mainboard. It has three Ethernet ports. One of them (IPMI LAN) is dedicated to IPMI. The other two, LAN1 and LAN2 are general-purpose. This question Configuring SuperMicro IPMI to use one of the LAN…
Mikhail Maltsev
  • 51
  • 4
0
votes
0 answers

Blade Node Freezing

We have a Supermicro Blade with 2 Node. The 2 node are identical, the exact same hardware. We are using those Node to cluster Hyper-V Server. They are build with Windows Server 2012 R2. The first node run really well, all of our VM can run on it…
mr.sedam
  • 3
  • 1
0
votes
2 answers

Windows: Ethernet-Connection number doesn't correspond to Ethernet-Hardware-number

First of all, I have to apologize: I really couldn't think of a better title, I do not really know how to describe my problem in only a few words. So here is my problem: I just installed Windows Server 2012 R2 on an Supermicro A1SRi-2758F. This…
Christian
  • 191
  • 11
0
votes
1 answer

Server becomes unresponsive after several days

I have a dedicated server that becomes unresponsive after several days of running-time. Sometimes it's 1 day and sometimes it's 5 days but it always happens and I can neither reach the server via ssh nor log into the supermicro control panel. I have…
maddo7
  • 155
  • 1
  • 2
  • 11
0
votes
2 answers

What IP address should I use for a device that I want to break network access to?

I have an IPMI server on a super micro motherboard that I am unable to disable. There is not even a jumper to disable this either. After seeing all of the security issues that the IPMI server they present has had, I just decided I want nothing to do…
eyeareque
  • 11
  • 1
0
votes
1 answer

SuperMicro CSE-815TQ-560B server is LOUD...can it be quieted?

I have been casually checking prices on servers for some time as I have always wanted to replace my tower/desktop "server" with a real server. I came across a great deal on a used SuperMicro 1u server, a CSE-815TQ-560B w/ dual Quad Core 2.5gHz…
CodeChimp
  • 323
  • 1
  • 6
  • 16
1 2 3
…
19 20