Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [storage-spaces-direct]

22 questions
7
votes
2 answers

Default behavior of Storage Spaces Direct results in what capacity?

I have read the Drive Symmetry Considerations and the Deploy Storage Spaces Direct articles and I'm lookup to understand the default behavior of the Enable-ClusterStorageSpacesDirect command as it relates to capacity. According to the articles, the…
Curious Blueprints
  • 191
  • 8
6
votes
2 answers

What would be the benefit of configuring SOFS with S2D on Server 2016?

Let's say I have 4 servers in a "storage cluster", each of them has access to a JBOD of 24 hard drives. Then I have another 16 servers in a "VM cluster", running Hyper-V, each of them only has a boot disk. All of the servers are connected to a 10GbE…
Brane
  • 205
  • 1
  • 2
  • 6
6
votes
3 answers

Cluster Fails when Enabling Storage Spaces Direct Server 2016

I'm trying to get a 2 Node Hyper-converged Fail-over cluster setup with 2016 Server and Storage Spaces Direct. I am able to Validate (with no errors) and Create the Cluster with the S2D tests included but when I run Enable-S2D on the Cluster the…
Coldsweat25
  • 71
  • 7
5
votes
2 answers

Hardware involved in Direct-connect (switchless) 2-node Storage Spaces Direct Cluster

For my department, I envision a two-node cluster of identical machines, running S2D. I want to use Broadcom 57416 10GBASE-T Adapters (example description), because they support RDMA and run at the speed of the free infrastructure provided by my…
Louis Waweru
  • 755
  • 1
  • 9
  • 29
4
votes
1 answer

How to Remove a Perfectly Good Disk S2D Storage Spaces Direct so it can be used by Operating System?

I'm trying to run a Windows Server 2019 Storage Spaces Direct (S2D) cluster with 4 SSDs and 8 spindles per cluster node. There were 2 additional SSDs (1 of which is used for OS, the other is unused at this moment). When setting up the S2D cluster it…
Stophr
  • 49
  • 1
  • 4
4
votes
1 answer

Storage Spaces Direct - how to use newly added disk as local and prevent auto pooling / auto-select?

Environment: Windows 2016 FCI cluster with S2D running SQL Server cluster on 2 VMs in Azure. New vhd disk has been added to a single VM in the cluster with intention to use it as local. Because 'AutoPool' is enabled, it grabbed the disk and marked…
P. D.
  • 71
  • 4
4
votes
2 answers

Is it possible to use several disks in the pool and some disks as local disks?

I have 4-node S2D cluster with 12 disks each on Windows Server 2016 Insider Preview 16257. I applied this settings by Cosmos Darwin to prevent adding new disks to the pool automatically Is there any way to prevent Storage Spaces Direct from…
culter
  • 507
  • 2
  • 9
  • 16
4
votes
1 answer

Windows server cluster shared volume (CSV) does not allocate full configured cache size

I have a Windows Server S2D cluster with five nodes. I have configured a 51GB CSV cache. However, after several days the server won't allocate more than about 1.5GB. I briefly saw 1.6GB. Why is the server not utilizing the available memory? My…
W Lucking
  • 81
  • 3
4
votes
2 answers

Fixing bad network drivers on 2019 DC S2D installation

I am helping to troubleshoot an existing Windows failover cluster on Windows Server 2019 Data Center. The cluster is set up to use Storage Spaces Direct (http://aka.ms/s2d) but there are problems with the deployment, specifically the network driver…
Avery Payne
  • 14,536
  • 1
  • 51
  • 88
3
votes
0 answers

Azure Failover Cluster Backup

We have configured a failover cluster instance in Azure (iaas), and we are running SQL 2016, and we have a backup directory presented as a csv (which is a mountpoint on the c: drive, under c:\clusterstorage) this is using storage spaces direct s2D.…
Norrin Rad
  • 353
  • 1
  • 5
  • 14
3
votes
1 answer

Storage spaces direct only using 32gb for each cache device, is this normal?

I have two cache devices and 4 storage devices in two machines that are being mirrored. I ran some powershell to disable clustered storage (s2d) and in disk management I'm left with disks that are still partitioned to s2d. As you can see from my…
Corey Manshack
  • 61
  • 1
  • 8
3
votes
2 answers

S2D warning: No disks found to be used for cache

I have a Storage Cluster consisting of 2 Windows Server 2016 Datacenter configured with a storage pool with 3 virtual disks consisting of the following physical disk. MediaType : HDD FriendlyName : HP EG0900JFCKB BusType : SAS …
Sven
  • 123
  • 2
  • 7
3
votes
1 answer

S2D cluster not recognizing new phisical drive

I have a cluster of three ProLiant DL380p Gen8 servers with Windows Server 2019 OS. After Predictive failure warning on one of the physical drives, I retired it (Set-PhysicalDisk -Usage Retired) and removed id from pool (Remove-PhysicalDisk…
user2368898
  • 31
  • 1
3
votes
1 answer

Managing Storage Spaces Direct in Windows Admin Center

I have a Hyper-V server, also running Windows Admin Center, let's call it FISH. That server is set up as gateway. On it, there are two storage pools, which can be managed via the Server Manager normally, and some VMs. In Windows Admin Center,…
Sašo
  • 1,494
  • 2
  • 10
  • 14
3
votes
1 answer

IneligibleDataPartition - S2D not starting - error 2

Getting this report but can't find any usefull info how to bind these disk back together: Get-Cachediskstatus.ps1 ---------------------------------------- Node: NAS13 DiskState DiskName …
Canoas
  • 872
  • 6
  • 8
1
2